Al/SiCp复合材料,Al/SiCp composites
1)Al/SiCp compositesAl/SiCp复合材料
1.TheAl/SiCp composites,having 15% volume ratio of SiC particles with average grain size 15 μm,were milled by using a Coated tungsten carbide endmill in this study.利用硬质合金涂层刀具开展了SiC颗粒(体积含量15%、平均粒径14μm)增强铝基复合材料(简称Al/SiCp复合材料)的铣削加工试验,并采用扫描电镜(SEM)对加工表面损伤与刀具刃口形貌进行显微观察与分析,利用表面轮廓仪对加工表面粗糙度进行测量。
英文短句/例句
1.The Research of 7075Al/SiCp Composites During Hot Compression Deformtion;7075Al/SiCp复合材料热压缩变形的研究
2.Research on the Narrow Slot Grinding Technology of SiCp/Al Composites;铝复合材料SiCp/Al窄槽磨削技术研究
3.The Study on Technology about Nondestructive Testing of SiCp/Al Composites;SiCp/Al复合材料无损检测技术研究
4.Research of Mechanism on the High-Speed-Cutting of Al-SiCp As-cast Metal Matrix Composites;SiCp/Al复合材料的高速切削机理研究
5.Study on Ultrasonic Milling Mechanism of SiCp/Al Composites超声铣削SiCp/Al复合材料的机理研究
6.Study on the tensile strength of SiCp/Al compositeSiCp/Al复合材料的抗拉强度研究
7.Research and Development of SiC Particle Reinforced Al Matrix CompositesSiCP/Al基复合材料的研究与进展
8.Heat Treatment and Properties of SiCp/Al Composites with Complex Shape;复杂形状SiCp/Al复合材料的热处理与性能
9.A Concern and Influential Factors on Fracture Toughness of SiC Partiuclate-reinforced AI Matrix Composite Materials;SiCp/Al复合材料断裂韧性的影响因素及思考
10.Investigation on the Compressive Property of SiCp/Al Functionally Gradient MaterialsSiCp/Al功能梯度复合材料的压缩性能研究
11.Effect of heat treatment on tensile deformation behavior of SiCp/Al composites热处理对SiCp/Al复合材料拉伸变形行为的影响
12.Research on SiCp/Al Composite Component by Centrifugal CastingSiCp/AL复合材料盘状件离心铸造技术研究
13.Study on the Machining of Micro Pore on SiCp/Al Composites by EDM电火花加工SiCp/Al复合材料微细孔的技术研究
14.Preparation of SiCp/Al MMCs by Ball Milling and Stir Casting球磨法和搅拌铸造法制备SiCp/Al复合材料
15.Effects of heat treatment on mechanical properties of Al-Cu-Mg based composites reinforced by SiC particle热处理对SiCp/Al-Cu-Mg基复合材料力学性能的影响
16.Effect of the Reactive Additions on the SiCp/Al Composites Fabricated by the Pressureless Infiltration Technique;活性剂对无压自浸渗法制备SiCp/Al复合材料的影响
17.Effect of Particle Size on Properties of SiCp/Al Composites and Its Numerical Simulation;颗粒尺寸对SiCp/Al复合材料性能的影响规律及其数值模拟
18.The Influence of Solidification Conditions on the Microstructure and Properties of SiCp/Al-6Mg Composites凝固条件对SiCp/Al-6Mg复合材料凝固组织及性能的影响
相关短句/例句
SiCp/Al MMCsSiCp/Al基复合材料
1.In order to analyze the weldability of SiC particle reinforced aluminum metal matrix composites(SiCp/Al MMCs),plasma arc in-situ welding ofSiCp/Al MMCs was carried out using argon-nitrogen mixture as plasma gas with Ti-Mg mixed powder as in-situ material.为分析SiCp/Al基复合材料的焊接性,以Ti-Mg混合粉末作为填充材料,采用氮氩混合等离子气体对SiCp/Al基复合材料进行等离子弧原位焊接。
2.Plasma arc "in-situ" welding ofSiCp/Al MMCs were carried out using argon-nitrogen mixture as plasma gases with Ti-Ni alloying as "in-situ" material.以Ti-Ni合金作为填加材料,采用氮氩混合等离子气对SiCp/Al基复合材料进行等离子弧原位焊接。
3.In this paper,SiCp/Al MMCs were selected as research objects,and process and mechanism of SiCp/6061Al MMCs by plasma arc welding(Ar and N2 as ionized gas, Ar as fielded gas) were systematically studied.研究表明填加Al-Si-Ti-Ni合金对SiCp/Al基复合材料进行等离子弧原位焊接,填加材料中Ti含量为5%时,可以有效抑制有害相Al_4C_3的生成,得到的焊缝组织较为致密,没有气孔、微观裂纹等缺陷,接头强度较之不加填充材料时有较大提高,达到226MPa,提高了接头的力学性能。
3)SiCp/Al compositesSiCp/Al复合材料
1.Preparation of high volume fractionSiCp/Al composites for electronic packaging;电子封装用高体积分数SiCp/Al复合材料的制备
2.Anti-corrosion properties of electroless nickel coating onSiCp/Al composites;SiCp/Al复合材料化学镀镍耐蚀性研究
3.An Application of Focusing Probe in SiCp/Al Composites′ Nondestructive Testing;聚焦换能器在SiCp/Al复合材料超声无损检测中的应用
4)Al-Si/SiCp compositeAl-Si/SiCp复合材料
1.The wear behaviors of spray depositedAl-Si/SiCp composites were investigated by using MM1000 frictional and wear testing machine.通过MM1000摩擦磨损试验,研究了喷射沉积Al-Si/SiCp复合材料在干滑动状态下的摩擦磨损特征,并对摩擦层的显微组织和形貌进行了观察,同时对磨损机理进行了分析。
5)SiCp/Al compositesSiCp/Al基复合材料
1.The paper is about craft experiment onSiCp/Al composites by the powder-EDM.利用混粉电火花加工方法对SiCp/Al基复合材料进行了工艺实验。
6)SiC_p/Al compositeSiCp/Al复合材料
1.The jointing performance ofSiC_p/Al composite with LD2 by the friction welding was studied,the microstructure of the bonded joint was examined,and the microhardness of the weld beam was measured.采用摩擦焊方法对SiCp/Al复合材料与LD2进行连接。
2.0Ni solder was used to solderSiC_p/Al composite substrate with two types of electroless Ni(P) layers.0Ni焊料钎焊两种化学镀Ni(P)后的SiCp/Al复合材料。
3.Study on Preparation and Impact Property of High Volume Fraction SiC_p/Al Composites;本文以无压浸渗工艺制备的高体积分数SiCp/Al复合材料为研究对象,对液态Al合金熔体浸渗SiC颗粒多孔体的浸渗过程、复合材料的微观组织和界面特性进行了理论与实验研究;利用西北工业大学结构和强度国家专业实验室研制的分段式Hopkinson压杆系统开展了增强相体积分数为65%的SiCp/Al复合材料的高应变率压缩行为和变形机制的研究。
延伸阅读
Al元素符号： al 英文名： aluminum 中文名： 铝相对原子质量： 26.9815 常见化合价： +3 电负性： 1.61外围电子排布： 3s2 3p1 核外电子排布： 2,8,3同位素及放射线：al-26[730000y] *al-27 al-28[2.3m]电子亲合和能： 48 kj·mol-1第一电离能： 577.6 kj·mol-1 第二电离能： 1817 kj·mol-1 第三电离能： 2745 kj·mol-1单质密度： 2.702 g/cm3 单质熔点： 660.37 ℃ 单质沸点： 2467 ℃原子半径： 1.82 埃 离子半径： 0.51(+3) 埃 共价半径： 1.18 埃常见化合物： al2o3 alcl3 al2s3 naalo2 al2(so4)3 al(oh)3发现人： 厄斯泰德、维勒 时间： 1825 地点： 丹麦名称由来：拉丁文：alumen， aluminis（铝）。元素描述：柔软轻质的银白色金属，在地壳中含量第三。元素来源：自然界完全没有铝单质存在。可以电解铝土(al2o3)制取铝。元素用途：上自飞机下到易拉罐应用广泛。因为纯铝太柔软，所以要加入不到1%的硅或铁以加大其硬度和强度。
