Al基复合材料,Al matrix composite
1)Al matrix compositeAl基复合材料
1.In situ synthesis ofAl matrix composite reinforced with micron-Al_2O_3 particles by low temperature sintering;低温烧结原位合成微米级Al_2O_3颗粒强化Al基复合材料
英文短句/例句
1.In Situ Synthesis of Al_3Ti Particulate-Reinforced Aluminum Matrix Composites;原位合成Al_3Ti增强Al基复合材料的研究
2.The Research on Preparation of Al Matrix Composites by in Situ Reaction原位合成Al基复合材料制备工艺研究
bustion synthesis of TiC/Ti-Al based compositesTiC/Ti-Al基复合材料的燃烧合成
4.Research and Development of SiC Particle Reinforced Al Matrix CompositesSiCP/Al基复合材料的研究与进展
5.Study on the Microstructures and Mechanical Properties of Reciprocating Extrusion Mg_2Si/Mg-Al Composites;往复挤压Mg_2Si/Mg-Al基复合材料组织与性能的研究
6.The Study on the Preparation and Properties of Mg-Al Based Composition Materials Enforced by Mg_2Si Particles;Mg_2Si粒子增强Mg-Al基复合材料的制备与性能研究
7.Study of Preparation、Microstructure and Performance Feature of Al Matrix Composites;Al基复合材料制备、组织及其性能特征的研究
8.Effets of LaO_2 on the Mierostructures of Insitu AI_2O_3-TiC_p/Al Composites;LaO_2对Al_2O_3—TiC_p/Al基复合材料组织结构的影响
9.Review of Preparation Technology for In-Situ Reaction TiB_2/Al Matrix Composite原位内生TiB_2/Al基复合材料制备技术评述
10.The Al based composites reinforced by the in-situ generated Al_2O_3 particles原位自生Al_2O_3颗粒增强Al基复合材料的研究
11.Investigation of fractal and wear characteristics SiCp reinforced al matrix compositeAl基复合材料分形特性及其磨损特性的研究
12.Effects of YAl_2 particulates on mechanical properties of Mg-Li-Al based compositesYAl_2颗粒增强Mg-Li-Al基复合材料性能的研究
13.Research on Microwave Heating Synthesis Al-TiO_2, Al-TiO_2-B_2O_3 Systems of Aluminum Matrix Composites微波合成Al-TiO_2，Al-TiO_2-B_2O_3系铝基复合材料研究
14.Electromagnetic Centrifugal Casting of SiC_p Reinforced Al and Al-Cu Matrix Composites;电磁离心凝固SiC_p增强Al及Al-Cu基复合材料研究
15.Aluminum Matrix Composites Fabricated by In-situ Reaction Technology in Al-ZrO_2, Al-ZrO_2-B SystemsAl-ZrO_2、Al-ZrO_2-B系原位反应技术制备铝基复合材料
16.Study on Ni/Al/BaTiO_3-based PTC Composites Ceramics;Ni/Al/BaTiO_3基复合PTC陶瓷材料的研究
17.Fabrication, Reaction Mechanism and Property of Aluminum Matrix Composites in the Al-ZrO_2 and Al-ZrO_2-C Systems;Al-ZrO_2、Al-ZrO_2-C系铝基复合材料的制备、反应机理及性能
18.Study on the Technical Base of Al/Al_2O_3 Composite"s Thixoforming in Pseudo-Semi-Solid State;伪半固态触变成形Al/Al_2O_3复合材料工艺基础研究
相关短句/例句
aluminum matrix compositeAl基复合材料
1.Microstructure and properties of particle reinforcedaluminum matrix composites;颗粒增强Al基复合材料组织和性能的研究
3)Al matrix compositesAl基复合材料
1.Effect of RE on the structure and properties of α-Al_2O_3/Al matrix composites;稀土对α-Al_2O_3/Al基复合材料组织与性能的影响
2.Dry friction and wear behavior ofAl matrix composites including those hybridizedly reinforced with 20 vol%SiC and 9 vol%Gr particles, and those separately reinforced with 20 vol%SiC and 9 vol%Gr particles were investigated.比较了 Si C和 Gr颗粒混杂增强Al基复合材料的干摩擦磨损行为 ,并与单一 Si CP和单一 Gr P增强Al基复合材料的相应行为进行了比较。
4)Al-based compositeAl基复合材料
1.We present the discovery of a new crystalline approximant phase to AlCuFe icosahedral quasicrystal in theAl-based composites reinforced by icosahedral i-AlCuFeB quasicrystalline particles[Al/(AlCuFeB)p].在二十面体准晶i-AlCuFeB颗粒增强的Al基复合材料[Al/(AlCuFeB)p]中发现了AlCuFe二十面体准晶的一种新的大单胞晶态近似相。
5)SiCp/Al MMCsSiCp/Al基复合材料
1.In order to analyze the weldability of SiC particle reinforced aluminum metal matrix composites(SiCp/Al MMCs),plasma arc in-situ welding ofSiCp/Al MMCs was carried out using argon-nitrogen mixture as plasma gas with Ti-Mg mixed powder as in-situ material.为分析SiCp/Al基复合材料的焊接性,以Ti-Mg混合粉末作为填充材料,采用氮氩混合等离子气体对SiCp/Al基复合材料进行等离子弧原位焊接。
2.Plasma arc "in-situ" welding ofSiCp/Al MMCs were carried out using argon-nitrogen mixture as plasma gases with Ti-Ni alloying as "in-situ" material.以Ti-Ni合金作为填加材料,采用氮氩混合等离子气对SiCp/Al基复合材料进行等离子弧原位焊接。
3.In this paper,SiCp/Al MMCs were selected as research objects,and process and mechanism of SiCp/6061Al MMCs by plasma arc welding(Ar and N2 as ionized gas, Ar as fielded gas) were systematically studied.研究表明填加Al-Si-Ti-Ni合金对SiCp/Al基复合材料进行等离子弧原位焊接,填加材料中Ti含量为5%时,可以有效抑制有害相Al_4C_3的生成,得到的焊缝组织较为致密,没有气孔、微观裂纹等缺陷,接头强度较之不加填充材料时有较大提高,达到226MPa,提高了接头的力学性能。
6)SiCp/Al compositesSiCp/Al基复合材料
1.The paper is about craft experiment onSiCp/Al composites by the powder-EDM.利用混粉电火花加工方法对SiCp/Al基复合材料进行了工艺实验。
延伸阅读
复合材料的复合效应复合材料的复合效应composition effect of composite materials复合材料的复合效应Composition effeet of Com-Posite materials复合材料特有的一种效应，包括线性效应和非线性效应两类。线性效应包括平均效应、平行效应、相补效应和相抵效应。例如常用于估算增强体与基体在不同体积分数情况下性能的混合率，即 Pc一巧几+VmPm式中Pc为复合材料的某一性质，乃、几分别为增强体和基体的这种性质，VR、Vm则分别是两者的体积分数。这就是基于平均效应上的典型事例。另外关于相补效应和相抵效应，它们常常是共同存在的。显然，相补效应是希望得到的而相抵效应要尽可能避免，这个可通过设计来实现。非线性效应包括乘积效应、系统效应、诱导效应和共振效应、其中有的己经被认识和利用，并为功能复合材料的设计提供了很大自由度;而有的效应则尚未被充分地认识和利用。乘积效应即已被用于设计功能复合材料。如把一种具有两种性能互相转换的功能材料X/y(如压力/磁场换能材料)和另一种Y/Z的换能材料(如磁场/电阻换能材料)复合起来，其效果是(X/D·(Y/Z)二X/Z，即变成压力/电阻换能的新材料。这样的组合可以非常广泛(见表)。系统效应的机理尚不很清楚，但在实际现象中已经发现这种效应的存在。例如交替迭层镀膜的硬度远大于原来各单一镀膜的硬度和按线性棍合率估算的数值，说明组成了复合系统才能出现的性质。诱导行为已经在很多实验中发现，同时这种效应也在复合材料的乘积效应┌──────┬──────┬──────────┐│甲相性质│乙相性质│复合后的乘积性质││ X/y│ Y/Z│沙到豹·(Y/公一义您 │├──────┼──────┼──────────┤│压磁效应│磁阻效应│压敏电阻效应│├──────┼──────┼──────────┤│压磁效应│磁电效应│压电效应│├──────┼──────┼──────────┤│压电效应│场致发光效应│压力发光效应│├──────┼──────┼──────────┤│磁致伸缩效应│压阻效应│磁阻效应│├──────┼──────┼──────────┤│光导效应│电致效应│光致伸缩│├──────┼──────┼──────────┤│闪烁效应│光导效应│辐射诱导导电│├──────┼──────┼──────────┤│热致变形效应│压敏电阻效应│热敏电阻效应│└──────┴──────┴──────────┘复合材料界面的两侧发现，如诱导结晶或取向，但是尚未能利用这种效应来主动地设计复合材料。两个相邻的物体在一定的条件下会产生机械的或电、磁的共振，这是熟知的物理行为。复合材料是多种材料的组合，如果加以有目的性的设计，肯定可利用这种共振效应，但是目前尚未加以研究。(吴人洁)
