铜基复合材料,copper matrix composite
1)copper matrix composite铜基复合材料
1.Effect of nano ZrO_2 crystal structure oncopper matrix composite interface;纳米ZrO_2晶型对铜基复合材料界面的影响
2.Thecopper matrix composites reinforced with short carbon fibers(CFs) were prepared by cold press and sintering using copperized short CFs.采用冷压烧结工艺制备了短碳纤维增强铜基复合材料,考察了该复合材料的干摩擦磨损性能。
3.The nano-Al2O3 reinforcedcopper matrix composite was prepared by powder metallurgy technique.以纳米Al2O3为增强相,用粉末冶金法制备了铜基复合材料。
英文短句/例句
1.Microstructure and properties of MoSi_2 particles dispersion strengthened copper-base compositeMoSi_2增强铜基复合材料的组织与性能
2.Progress on Ceramic Particles Reinforced Copper-matrix Composites陶瓷颗粒增强铜基复合材料研究进展
bustion and In-Situ Reaction Synthesis of Dual-phase Ceramic Reinforced Copper-based Composites;燃烧反应原位合成双相陶瓷增强铜基复合材料
4.Study on Fabrication and Properties of Ti_3SiC_2 Dispersion Strengthened Copper Composites;Ti_3SiC_2弥散强化铜基复合材料的制备和性能研究
5.Studies on Nano-Al_2O_3 Reinforced Brass Matrix Composite;纳米Al_2O_3颗粒增强黄铜基复合材料的研究
6.Study on Copper Matrix Composite Reinforced with Alumina Particles;氧化铝颗粒弥散强化铜基复合材料的研究
7.Research on the Preparation and Performance of Advanced Wear-Resistant Copper Matrix Composites;高性能耐磨铜基复合材料的制备与性能研究
8.Development of High-Strength and High-Conductivity Copper Matrix Composite Reinforced with Cr_3C_2 Particles;Cr_3C_2颗粒增强高强高导铜基复合材料研制
9.Preparation of Machinable Conductive Ceramics Ti_3AlC_2 and Cu/Ti_3AlC_2 CompositesTi_3AlC_2可加工导电陶瓷及其铜基复合材料的研制
10.Manufacturing Process and Property of Al_2O_3 Strengthened Copper-based Composite MaterialAl_2O_3强化铜基复合材料的制备和性能研究
11.Research of Carbon Nanotubes-Cu Composite with Interpenetrating Networks网络互穿结构的碳纳米管铜基复合材料研究
12.Manufacturing Process and Property of Al_2O_3 Dispersion Strengthened Copper-based Composite MaterialAl_2O_3弥散强化铜基复合材料的制备及性能研究
13.Electroless Copper Plating on Ceramic Particles and Microstructure and Property of Ceramic Particles /C-Cu Composites;陶瓷颗粒化学镀铜及陶瓷颗粒/石墨—铜基复合材料组织和性能研究
14.Electroless Copper Plating on Short CF and Microstructure and Property of Short CF/C-Cu Composite;短碳纤维化学镀铜及短碳纤维/石墨—铜基复合材料组织性能研究
15.Study on the Preparation and Properties of Particulate Reinforced Copper Matrix Composites Fabricated by Composite Electroforming;复合电铸制备颗粒增强铜基复合材料工艺及性能研究
16.Study on New Low-Electrical Contacted Compounded Material on Copper-Based;新型弱电铜基电触头复合材料的研究
17.The Studies of Ester Substituted Copper Phthalocyanines and Their Composites;酯基取代酞菁铜及其复合材料的研究
18.Investigation on the Fabrication and Properties of the Cu Base Composites with Low Friction and High Wear Resistance;铜基减摩耐磨复合材料的制备与性能研究
相关短句/例句
copper matrix composites铜基复合材料
1.SiCf/Ti/Cu composite was prepared by foil-fiber-foil method in order to model the effects of Ti as interfacial binder on SiC fiber reinforcedcopper matrix composites and the corresponding interfacial reactions.利用箔-纤维-箔法制备了SiCf/Ti/Cu复合材料,用于模拟研究Ti在SiC纤维增强铜基复合材料中用作界面改性涂层时的作用及其界面反应情况。
2.The reasons for failure of electrodes during spot welding and the latest research oncopper matrix composites for electrodes are summarized in the paper.概述了电阻点焊过程中点焊电极的失效原因及铜基复合材料点焊电极的研究进展。
3.In this paper,the surface treatment of carbon fiber and the research progress on the fabrication and properties of the carbon fiber reinforcedcopper matrix composites are introduced.介绍了碳纤维的表面处理及碳纤维增强铜基复合材料的制备工艺与性能的研究进展。
3)Cu-based composite铜基复合材料
1.Preparation ofCu-based composite materials reinforced by nanotube by powder-metallurgy;粉末冶金法制备纳米碳管增强铜基复合材料的研究
2.The preparation methods ofCu-based composite were discussed,and the preparation techniques of the materials were analyzed,and some advices were put forward.综合论述了铜基复合材料的制备方法,对铜基复合材料的制备工艺进行了分析,并提出了自己的建议。
3.To solve the interfacial bonding problem of reinforced phase and matrix phase by conventional sintering,Cu-based composite reinforced by in-situ formed Mo2C was prepared by normal pressure sintering,hot pressing sintering and plasma activated sintering(PAS).针对常规烧结方法难以实现强化相与基体相界面良好结合的特点,采用常压烧结、热压烧结、等离子活化烧结(PAS)3种不同烧结方式制备原位生成Mo2C强化铜基复合材料。
4)Cu Matrix Composites铜基复合材料
1.Preparation of DisperoidsCu Matrix Composites;弥散强化铜基复合材料的制备
5)Copper-based composite铜基复合材料
bustion and In-Situ Reaction Synthesis of Dual-phase Ceramic Reinforced Copper-based Composites;燃烧反应原位合成双相陶瓷增强铜基复合材料
2.The fundamental properties of the copper-based composite were studied.采用放热合成和热压烧结的工艺制备出一种陶瓷颗粒增强铜基复合材料,采用X-ray、扫描电子显微镜对制备的铜基复合材料进行了结构分析,并研究了材料的电学和耐磨特性。
6)Al Cu based composite铝铜基复合材料
延伸阅读
碳纤维增强铜基复合材料分子式：CAS号：性质：以铜为基体，以碳纤维增强的金属基复合材料。选择高强高模、高强中模及超高模量碳纤维，以一定的含量和分布方式与铜基体组成不同性能的碳/铜复合材料。由于碳纤维具有很高的强度和模量，负的热膨胀系数以及耐磨、耐烧蚀等性能，与具有良好导热导电性的铜基组成复合材料具有很好的导热导电性、高的比强度、比模量，很小的热膨胀系数和耐磨、耐烧蚀性。是高性能的导热、导电功能材料。主要用于大电流电器、电刷、电触头和集成电路的封装零件。用碳/铜复合材料制成的惯性电机电刷工作电流密度可高达500A/cm2。碳/铜复合材料热膨胀系数为6×10-6℃-1，导热系数为220W/(m·K)，高于任何低热膨胀系数材料。在高集成度的电子器件中有很好的应用前景。
