气相聚合,gas phase polymerization
1)gas phase polymerization气相聚合
1.Application of catalyst YS-842B in propylenegas phase polymerization process;YS-842B催化剂用于丙烯气相聚合工艺
2.Progress ingas phase polymerization of butadiene;丁二烯气相聚合研究进展
3.Some research works on electrostatics and wall sheeting ingas phase polymerization fluidized bed reactor were reviewed, including description of reactor wall sheeting, relationship of electrostatics with wall sheeting, hydrodynamics of fluidized bed, and principle of electrostatic charge generation.综述了气相聚合流化床内静电及结片现象的研究进展,对流化床内结片现象进行了描述,将静电与流化床的壁面结片现象关联,并从流化床流体力学行为与静电生成速率的关系出发对静电的生成机理进行了论述。
英文短句/例句
1.Studies on Gaseous Phase Polymerization of Ethylene with Highly Active Catalyst(Ⅰ)──The Gaseous Phase Homo-and Copolymerization as well as Kinetics of Gaseous Phase Polymerization of Ethylene新型高活性催化剂乙烯气相聚合的研究（Ⅰ）──气相均聚和共聚反应及气相均聚动力学
2.Gas Phase Polymerization of Conjugated Dienes with Supported Rare Earth Catalyst: Kinetics and Molecular Weight Control;双烯烃气相聚合—聚合动力学和分子量控制研究
3.Bimodal polyethylene produced by oscillating operation of hydrogen in single gas-phase polymerization reactor乙烯气相聚合过程中氢气振荡操作制备双峰聚乙烯
4.Study on Fluidized Bed Reactor for Gas-phase Propylene Polymerization;丙烯气相聚合流化床反应器冷态模拟研究
5.Study on Flow Pattern in Gas Phase Ethylene Polymerization Fluidized Bed Reactor;乙烯气相聚合流化床反应器流动模式的研究
6.Simulation of Particle Size Distribution in Gas Phase Ethylene Polymerization Fluidized-Bed Reactor;乙烯气相聚合颗粒粒径分布模型的研究
7.Single Particle Modeling during Olefin Gas Phase Polymerization Process;烯烃气相聚合过程中颗粒生长的模型化
8.Identification of polymers by pyrolytic gas chromatographyGB/T7131-1986裂解气相色谱法鉴定聚合物
9.Vapor/Liquid/Solid Multiphase Photopolymerization of Vinyl Acetate;醋酸乙烯气/液/固多相光聚合研究
10.Study on Phase Equilibrium and Gas-Liquid Mass Transfer in Ethylene Slurry Polymerization System;乙烯淤浆聚合体系相平衡及气液传质研究
posite Particles of Doped Polyaniline and Pyrogenic Silica掺杂聚苯胺与气相白炭黑复合粒子的研究
12.Study on Morphology, Crystallization and Electrical Properties of Vapor-Grown Carbon Fiber Filled Multi-Phase Polymer Blends;气相生长碳纤维填充多相聚合物体系相结构、结晶与电性能的研究
13.Template synthesis flake like polypyrrole and montmorillonite/polypyrrole composites by vapor-liquor phase polymerization气液相聚合制备蒙脱土/聚吡咯的结构特征及其导电性能
14.Evaluation of chromatographic performance of polymerized ionic liquid stationary phase for capillary gas chromatography聚合离子液体毛细管气相色谱固定相的性能评价
15.The Synthesis and First Application as Packings for Column Chromatography of Soluble β-cyclodextrins-Epichlorohy drin Polymers (β-CD-E)可溶性β─环糊精聚合物的合成及在气相色谱中的应用
16.Study on the Synthesis of PE In-situ Alloys by Gas-phase and the Relationship between Its Properties and Structure;气相法聚乙烯原位合金的合成及其结构—性能关系的研究
17.Surface Characterization of Inorganic Component in Polymer Composites by Inverse Gas Chromatography;聚合物基复合材料中无机组分表面性能反气相色谱研究
18.pyrolysis gas chromatography of polymers高聚物裂解气相色谱
相关短句/例句
gas-phase polymerization气相聚合
1.This paper presents the progress of the Ni-BR production process at home and abroad,including the molecular weight regulation process,catalyst compounding process,gas-phase polymerization process,bulk polymerization process and heat pump,screw-extruding process used in the final treatment of the BR production.介绍了近几年国内外镍系顺丁橡胶生产技术的进展情况,内容涉及分子量调节技术、催化剂配置技术、节能降耗的气相聚合、本体聚合工艺及橡胶后处理过程中使用的热泵技术、螺杆挤压工艺,同时也对国内外顺丁橡胶新型防老剂的使用情况及其新品种的开发进行了简要介绍。
2.The design and operation of a semi-batch stirred-bed reactor forgas-phase polymerization(copoly merization) of olefin have been described The reactor can be operated over the range of temperature and pressure used in the gas phase polymerization of Catalloy It is found that the heat-transfer limitation sets an upper bound on the reactor STY (space time yield根据冷模研究结果，设计了一套研究半连续烯烃气相聚合的反应器，其温度、压力控制及反应速率的测定完全能够达到催化剂性能评价和动力学研究的要求。
3.A new method for the manufacture of conductive paper bygas-phase polymerization was explored in this paper.采用气相聚合法制备了导电纸,探讨了聚合反应中氧化剂浓度、处理时间、干燥时间、反应时间等因素对聚吡咯导电纸性能的影响。
3)vapour phase polymerization气相聚合
4)gaseous polymerization气相聚合法
5)vapor-liquor phase polymerization气液相聚合
1.Template synthesis flake like polypyrrole and montmorillonite/polypyrrole composites byvapor-liquor phase polymerization气液相聚合制备蒙脱土/聚吡咯的结构特征及其导电性能
6)gas phase polymerization process气相法聚合
延伸阅读
气相聚合分子式：CAS号：性质：单体以气态方式加料进行的聚合反应。实际上，聚合体系往往在聚合初期为气相，以后则成为液相甚至固相，具体情况随所处的压力和温度等反应条件而定。许多常温常压下以气态形式存在的单体（如乙烯、丙烯和氯乙烯等），常常采用气相聚合将其转化为聚合物。例如，乙烯在温度为180～200℃、压力为150～300MPa下，采用氧或有机过氧化物为引发剂进行的聚合反应即为气相聚合的一个实例。
