离异共析,divorced eutectoid transformation
1)divorced eutectoid transformation离异共析
1.The spheroidizing annealing technologies were proposed with aid of calphad technique to process two kinds of UHCs through thedivorced eutectoid transformation mechanism of the austenite of inhomogenous carbon concentration, which consist of austenitizing at intermediate temperature in three phases (γ(fcc)+α(bcc)+cem) equilibrium aera and soaking below the eutectoid transformation temperature.利用碳浓度不均匀奥氏体离异共析转变机制 ,借助于相图计算技术 ,对UHCs 1 0Al(含Al 1 0 %wt % )和UHCs 1 5Al(含Al1 5wt % )两种锻造超高碳钢提出了在三相区奥氏体化并在共析转变温度低限等温球化工艺 ,并对不同球化组织的力学性能进行了测定。
2.The microduplex structure formed bydivorced eutectoid transformation demonstrated the best properties,with the yield strength of about 480MPa, the tensile strength of about 850MPa,the uniform elongation of about 11%and the total elongation of about 21%.基于离异共析转变获得的超细化复相组织具有最好的综合力学性能,屈服强度约为480 MPa,抗拉强度约为850 MPa,均匀伸长率约为11%,总伸长率约为21%。
英文短句/例句
1.MICROSTRUCTURE REFINEMENT OF EUTECTOID STEEL BASED ON DIVORCED EUTECTOID TRANSFORMATION基于离异共析转变的共析钢组织细化
2.Research for the Separation Method of Ethyl Acetate-Isopropanol Azeotropic Mixture乙酸乙酯—异丙醇共沸物分离方法研究
3.alysis of variance离散分析;变量分析;变异分析;变异数分析;变异因素分析法
4.Systhesis of Copolymers of Isobutyl and Tert-butyl Acrylate by Cationic Polymerization and Atom Transfer Radical Polymerization;阳离子/ATRP合成异丁烯/丙烯酸叔丁酯共聚物研究
5.Simulation and Experiment for Separation of Cyclohexane -Isopropanol Azeotropic Mixture环己烷—异丙醇共沸物分离的模拟与实验研究
6.Simulation and optimization of extractive distillation for isopropanol-water azeotropic mixture萃取精馏分离异丙醇-水共沸体系的模拟与优化
7.Cationic Copolymerization of isoprene and styrene synthesis异戊二烯和苯乙烯阳离子共聚合成研究
8.Simulation of Dividing-Wall Azeotropic Distillation Column for Separation of Isopropyl Alcohol and Water隔壁共沸精馏塔分离异丙醇水溶液的模拟
9.Analysis of mechanism of vertical-component density flow water-sediment separation device垂向异重流式水沙分离鳃水沙分离机理浅析
10.Variation , Mortification and Christian Communism变异·禁欲·共产——“耶稣家庭”再探析
11.Bioconversion of Linoleic Acid into Conjugated Linoleic Acid and Analysis of CLA Isomers;共轭亚油酸的生物转化和异构体分析
12.Singular Analysis of Two-dimensional Elastic Cable with 1:1 Internal Resonance1:1内共振悬索的二维奇异性分析
13.The Research of Deviating from Public Interest in Public Policy Making;公共政策制定中的公共利益偏离问题分析
14.Can it be resolved into optical isomers?这能离析为旋光异构体吗？
15.The Isolation, Purification and Analysis of Isoflavones in Defatted Soybean;大豆异黄酮的提取、精制及分离分析
16.A differential analysis of divorce and remarriage of the women in Tang;唐代妇女离婚改嫁实践的差异性分析
17.The Single Ion Model Concerning the Magnetic Anisotropy of TbCo Thin Film;TbCo薄膜磁各向异性的单离子模型分析
18.Differentiation Between The Zhuang Edition and The Furong School Edition of Li Sao;庄本、夫容馆本《离骚章句》异文辨析(二)
相关短句/例句
Carbides Isolation Eutectoid碳化物离异共析
3)divorced eutectic离异共晶
1.The second-phase is mainlydivorced eutectic β phase in the Mg-Al based alloys.Mg-Al系镁合金中的第二相主要是离异共晶β相,其含量、形状、分布和大小对合金的力学性能和成形有很大的影响。
2.Microstructure within the fusion zone consisted of the γ′ matrix and Ni 5Zr in the interdentric regions,which were the products ofdivorced eutectic reaction between γ phase and Ni 5Zr at elevated temperature.对焊缝金属进行显微分析后发现：室温下凝固组织由基体γ′相和晶间Ｎｉ５Ｚｒ相组成，它们是高温下γ相与Ｎｉ５Ｚｒ相离异共晶反应的产物。
3.The results show that,Al-Mg-Zn filler metal reacting with the base metal AZ31B,and α-Mg+β-Mg17(Al,Zn)12divorced eutectic structure is formed in the brazed joint.结果表明,在钎焊接头的钎缝中钎料与母材AZ31B发生反应生成离异共晶组织-αMg+-βMg17(Al,Zn)12,母材AZ31B的显微硬度最低,钎缝中的-βMg17(Al,Zn)12相显微硬度最高。
4)co-segregation analysis共分离分析
1.Screen some mutants to do aco-segregation analysis.本研究通过对部分转化中花11号产生的T-DNA插入突变体进行了筛选、鉴定和共分离分析,以及对其中一个多性状突变体P1308进行了定位。
5)α(Al)-CuAl2 divorced eutecticα(Al)-CuAl2离异共晶
6)Separation and analysis of copolymer共聚物的分离分析
延伸阅读
共析点eutectoidpoint：相图内代表共析成分和共析温度的点。
