热氧化法,thermal oxidation
1)thermal oxidation热氧化法
1.A process for synthesis one-dimension Fe2O3 iron oxide nanoneedles upon iron nanocrystalline layers which were pulse-plated on the metal substrates usingthermal oxidation in furnace was introduced.利用在金属基板表面电镀一层金属Fe纳米晶,然后通过热氧化法制备出了一维Fe2O3金属氧化物纳米针;利用扫描电镜(SEM)、透射电镜(TEM)、超高分辨透射电镜(HRTEM)和X-射线衍射仪(XRD)等对纳米晶和纳米针的晶体结构与微观形貌等进行了表征。
2., firstly, a pure zinc nanocrystalline layer was produced by using periodic reverse pulse plating process, and then the ZnO nanoneedle array grew upon the layer throughthermal oxidation in air.在金属基板表面电沉积一层金属Zn纳米晶,将该纳米晶置于高温炉中,通过热氧化法成功制备了一维ZnO纳米针。
3.ZnO thin films were prepared bythermal oxidation and pulsed laser deposition.对两种方法制备的薄膜的形貌、结构和室温下的荧光光谱作了比较,并对ZnO薄膜紫外光(UV)的发射机理作了初步的分析,发现与PLD方法相比,热氧化法制备的ZnO薄膜所产生的紫外光发射强度(17816任意相对强度单位a。
英文短句/例句
1.Synthesis and Characteristics of ZnO Thin Films by Thermal Oxidation and Pulsed Laser Deposition Techniques;热氧化法与PLD法制备ZnO薄膜及其特性
2.Characterizations of SnO_2 films prepared by two-step thermal oxidization二步热氧化法制备SnO_2薄膜的特性(英文)
3.Study on the Synthesis of Micaceous Iron Oxide Yellow Iron Oxide and Red Iron Oxide by Hydrothermal Method;水热法合成云母氧化铁和氧化铁黄、铁红的研究
4.Magnetite Nanoparticles Prepared by Thermal Decarboxylation and Decomposition of Iron Hydroxide Alkylsulfonyl Acetate烷基羧甲砜基氢氧化铁热脱羧和热分解法制备纳米氧化铁(英文)
5.Test method for thermal conductivity of beryllium oxide ceramicsGB/T5598-1985氧化铍瓷导热系数测定方法
6.Preparation of Tin Oxide Thin Films by Thermal Evaporation;热蒸发法制备氧化锡薄膜的工艺研究
7.Synthesis and Characterization of TiO_2 Nano Powders by Pyrogenation-with-Sugar-Protection Method二氧化钛纳米粉体的加糖热解法制备
8.A SIMPLE SOLVOTHERMAL METHOD TO SYNTHESIZE α-Fe_2O_3 NANOSTRUCTURES简单溶剂热法制备纳米氧化铁(英文)
9.Thermodynamics of alumina leached by sulfuric acid process硫酸浸出法提取氧化铝的热力学讨论
10." Rubber, vulcanized--Test method of heat and oxygen--Tube tester ageing method"GB/T13939-1992硫化橡胶热氧老化试验方法管式仪法
11.Jet fuels-Determination of thermal oxidation stability-JFTOT methodGB/T9169-1988喷气燃料热氧化安定性测定法(JFTOT法)
12.petroleum products-determination of thermal oxidation stability of gas turbine fuels-jftot method石油产品－喷气燃料热氧化安定性测定法(JFTOT法)
13.Study on the Preparation of Titanium Dioxide Nanomaterials by Microemulsion and Hydrothermal Synthesis;微乳液法和水热法制备纳米二氧化钛的研究
14.Study on the Preparation of γ-Alumina Nanomaterials by Microemulsion and Microemulsion Hydrothermal Synthesis;微乳液法和微乳水热法制备γ-氧化铝的研究
15.Hydrothermal Preparation of TiO_2 Fibers and Complex Fluorides;水热法制备二氧化钛纤维和复合氟化物
16.Microcalorimetric Study of Acidity and Alkalescence of Oxides;氧化物催化剂酸碱性的微量吸附量热法研究
17.The extraction and purification of superoxide dismutase from blood by low molecular weight PAAS and heat precipitation用低聚PAAS热沉淀法提取血液超氧化物歧化酶
18.Orthogonal Test of Hydrothermal Vulcanization on Low-Grade Lead-Zinc Oxide Ore水热法硫化低品位氧化锌矿的正交试验研究
相关短句/例句
thermal oxidation method热氧化法
1.It analyses analyzed the colors of hardened steel under the conditions of the high-speed cutting by thethermal oxidation method, and the cutting temperatures are estimated.根据实验观察,采用热氧化法对高速切削的淬硬钢切屑成色进行分析,以此判断在切削过程中切屑经历过的切削温度。
2.,metal Cu nanocrystalline layers were plated on the surface of metal substrates by pulse plating,then the Cu nanocrystalline layers were used to synthesize CuO nanoneedles bythermal oxidation method at 700℃ in the air.采用脉冲电沉积技术在金属 Cu 基板表面电沉积纳米晶 Cu 薄膜,在空气中采用热氧化法制备出一维金属 CuO 纳米针材料。
3)heat-tube oxidation method热管氧化法
4)oxidation-hydrothermal method氧化–水热法
5)Oxidation hydrothermal crystallization method氧化水热晶化法
6)thermolytic热分解氧化法
1.The composite material silica-ruthenium dioxide was prepared throughthermolytic oxidation for the film electrodes of supercapacitor, taking RuCl_3·xH_2O mixed with TEOS as raw material and Ti slide as substrate.以水合三氯化钌和正硅酸乙酯为原料,以钛片为基底,采用热分解氧化法制备了二氧化硅/氧化钌复合膜电极,利用扫描电子显微镜观察电极表面形貌,利用循环伏安曲线法研究电极的电容性能·考察了原料配比,烧结温度,烧结时间等制备条件对电极电容性能的影响·结果发现,二氧化硅/氧化钌复合膜电极具有优良的电容性能,当水合三氯化钌与正硅酸乙酯的物质的量的比为5∶2,烧结温度为350℃,烧结时间为1h时单电极的比容量最高可达137mF·cm-2,比文献值提高了近3个数量级
延伸阅读
氧化热裂解分子式：CAS号：性质：又称部分氧化裂解法或部分燃烧裂解法。是一种将氧化剂混入原料烃，使部分原料烃燃烧，生成的热量用来维持原料烃裂解反应所需热量的自热裂解法。所用的氧化剂可以是氧气或空气。裂解产物中二氧化碳含量很高(达20％)，产物分离能耗较大。典型的方法有美国道化学公司的原油裂解法、德国BASF公司的焦炭流化床法、日本宇部兴产的强制流化床裂解法等。道化学法裂解温度1200～2000℃，反应停留时间0.1s，乙烯收率22％～27％(原油原料)。此法可用于生产烯烃和乙炔，但产品分离困难，经济效益不理想等问题制约了此项技术发展。
