单面焊接,one side welding
1)one side welding单面焊接
1.This paper has researched the process ofone side welding of ceramic backing WQT-1, forming quality of back weld, chemical composition of weld, and mechanical properties of joints with CO_2 Gas Shielded Welding, X-ray inspection, tensile, bend and impact test.采用CO_2气体保护焊,通过x射线探伤,拉伸、弯曲、冲击试验、研究了WQT-1陶质衬垫的单面焊接工艺,反面焊缝成形质量以及焊缝化学成分与接头的机械性能。
2.This paper discusses in detail theone side welding technology for CO_2 gas shielde arc welding of the ceramic gasket WQT—1, and analyses all factors influencing the welding process and the forming of back welded seams, and decides on the best assembly gap and the groove angle.介绍和讨论了CO_2气体保护陶质衬垫WQT—1的单面焊接工艺;分析了影响衬垫单面焊接工艺过程及反面焊缝成形的各种因素,如:坡口根部间隙、坡口角度、错边量、钝边高度、操作方法、焊接参数、接头处理、定位焊缝等,确定了最佳装配间隙和坡口角度。
英文短句/例句
1.Ceramic welding linning is mainly applied in high efficiency welding technology, which has a function of single surface weld but double surface forming.陶持焊接衬垫主要应用在高效焊接工艺中,起到单面焊接双面成型的作用。
2.Study on Properties of One Side Welding Joints and Protection Mechanism of Back Weld of Stainless Steel;不锈钢单面焊接头性能及背面保护机理的研究
3.One side welding thermal cycle measuring experiment of heavy plate with V-shape groove特厚钢板V型坡口单面焊接热循环测定实验
4.The Research of Single Face Welding-Double Face Forming Automatic Welding Equipment;单面焊双面成形自动焊接设备的研制
5.Forming Process Research on Joint Vertical Welding from Single-face to Double-face of Low-alloy Steel Plate低合金钢板对接立焊单面焊双面成形工艺研究
6.Application of Single-Welding-Shaping-Two-Sides Technology in Welding of Tanker Metal Tank单面焊双面成型工艺在罐体焊接中的应用
7.One-side welded bed plate for flanges in marineGB/T11693-1994船用法兰焊接单面座板
8.monoside twin shots welder(KD-16)单面双点点焊机(KD-16)
9.narrow gap one-side automatic welding窄间隙单面自动电弧焊
10.monoside twin shots welder(KD-17)单面双点点焊机(kd-17)
11.The bars were welded to the deck plate.扁钢焊接在桥面钣上。
12.Automatical EB Welding of Curved Weldment工件平面曲线焊缝的电子束自动焊接
13.Study of Length Calculation of Three Side Welded Lap;三面围焊搭接角焊缝长度计算的探讨
14.Research on Welding Characteristics of EH36 Steel by Using Double-Sided Arc WeldingEH36钢厚板双面双弧立焊焊接特性研究
15.The welding res etter especially for the big-size,complicated and demanding products.针对焊接面积大而复杂,焊接要求高的产品,焊接效果优越。
16.3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.3. 在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
17.apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
18.Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
相关短句/例句
one side welding process单面焊接法
3)single welded joint单面焊接合
4)single fillet welded单面焊接的
5)single welded butt单面焊对接
6)single welded lap单面焊搭接
延伸阅读
齿轮单面啮合检查仪见齿轮综合检查仪。