石英纤维织物,quartz fabrics
1)quartz fabrics石英纤维织物
1.Advanced pedormancequartz fabrics from local supplier were developed for satisfying the items plan.研制开发了国产高性能石英纤维织物。
2)Graphite fiber fabric石墨纤维织物
3)quartz fiber石英纤维
1.Preparation of Al_2O_3 coatingquartz fiber reinforced methyl silicon resin composites by means of sol-gel technique;溶胶-凝胶Al_2O_3涂层石英纤维增强甲基硅树脂基复合材料的制备
英文短句/例句
1.Study on the mechanical properties of quartz fiber-reinforced composite for canal post石英纤维根管桩复合材料的力学性能研究
2.The clinical observation of quartzfiber-reinforced composite post and core in the restoration of residual crown and residual root石英纤维增强树脂桩核修复残根残冠效果观察
3.Study on Properties of Cyanate Ester Matrix Composites Reinforced by Quartz Yarns石英纤维增强氰酸酯树脂基复合材料性能研究
4.Clinical evaluation of fiber post on restoration of tooth defect石英纤维桩对牙体缺损修复的临床疗效评价
5.The therapeutic effects of D.T.light fiber post in restoration of the residual crown石英纤维桩修复磨牙残冠的临床疗效分析
6.Study on Strengthening Process of Quartz Fiber Composites石英纤维复合材料强化处理工艺的研究
7.SURFACE TREATMENT OF SILICA GLASS FIBERS IN PHOSPHATE MATRIX COMPOSITES磷酸盐基复合材料中石英纤维的表面处理
8.Analysis on Dielectric Properties of the silicon dioxide composites;二氧化硅增强石英纤维基复合材料介电性能分析
9.Retention strength of self-etching and total-etching adhesive systems on quartz fiber-reinforced posts自酸蚀和全酸蚀树脂粘结剂对石英纤维桩固位力影响的比较研究
10.Effects of Different Amount of Residual Tooth on Fracture Resistance Ability in Quartz-Fiber Post Crown不同牙体剩余量对石英纤维桩冠抗折性能的影响
11.The properties of silica fiber reinforced composites of chrome-aluminum phosphate/organosilicon matrixes石英纤维增强磷酸铬铝/有机硅杂化树脂基复合材料性能
12.FABRICATION AND PROPERTIES OF SiO_2-AEROGEL /SHORT SILICA FIBER POROUS SKELETON COMPOSITESiO_2气凝胶/短切石英纤维多孔骨架复合材料的制备与性能
13.Experimental Study for Improving the Toughness of Harden Cement Using Carbon Fiber碳纤维改善水泥石韧性实验研究(英文)
14.pumpellyite-prehnite-quartz facies绿纤石－葡萄石－石英相
15.flexibility [asbestos fibre]柔韧性〔石棉纤维〕
16.Study on Correlation between the Performance of Long Fiber Filtering and Quartz Sand Filtering;长纤维过滤与石英砂过滤的性能对比研究
17.pure silica core single-mode fiber纯石英纤芯单模光纤
18.inorganic fiber metal fiber,stone fiber,glass fiber,slag fiber,Etc无机纤维:金属纤维、玻璃纤维、岩石纤维矿渣纤维等
相关短句/例句
Graphite fiber fabric石墨纤维织物
3)quartz fiber石英纤维
1.Preparation of Al_2O_3 coatingquartz fiber reinforced methyl silicon resin composites by means of sol-gel technique;溶胶-凝胶Al_2O_3涂层石英纤维增强甲基硅树脂基复合材料的制备
4)silica fiber石英纤维
1.Preparation ofsilica fiber reinforced silicon nitride composites using two precursors pyrolyzed at low temperature;两种先驱体低温裂解制备石英纤维增强氮化硅复合材料
2.Studies on competitive adsorption of phenolic resin-ethanol system onsilica fiber surface;酚醛-乙醇体系在石英纤维表面吸附行为研究
3.Domesticsilica fiber reinforced minicomposites were fabricated by slurry infiltration(in- cluding silica sol,silica slurry and silicon nitride slurry).针对国产石英纤维强度,本工作采用液相浸渍法(硅溶胶、石英浆料和氮化硅浆料)制得Mini复合材料,利用两参数Weibull分布,对其强度及分布进行了研究,采用Kolmogrov非参数检验对其分布进行了检验。
5)silica fibers石英纤维
1.Three-dimensionalsilica fibers reinforced nitride matrix composites(3D SiO2f/Si3N4-BN) were prepared through repeated infiltration and pyrolysis.采用先驱体转化法制备了三维石英纤维增强氮化物基复合材料(3D SiO2f/Si3N4-BN),用等离子射流烧蚀方法研究了复合材料的烧蚀性能,运用扫描电镜及能谱仪对烧蚀表面微观形貌进行了观察和分析。
2.Ablation macrostructures and roughness of the nitride matrix composites reinforced by three dimensionalsilica fibers were measured by three-dimensional macrostructure and roughness system.采用三维形貌及表面粗糙度测量系统研究三维石英纤维增强氮化物基复合材料的烧蚀形貌及表面粗糙度,运用Origin软件对所得形貌及表面粗糙度进行分析。
3.This study investigated the methods of eliminating the agents on the surface ofsilica fibers, used SEM and XPS to analyze the effects, compared the tensile strength of disposedsilica fibers with the originals.石英纤维广泛运用于超高马赫数导弹天线罩材料中,本文研究了石英纤维表面浸润剂的去除方法,对不同手段处理后的石英纤维做了SEM、XPS分析,比较了处理前后石英纤维的拉伸强度的变化。
6)silica fiber fabric石英织物
1.A 3dimensionalsilica fiber fabric reinforced silicon nitride composite was prepared by the polymer impregnation pyrolysis method using a preceramic polymer named perhydropolysilazane (PHPS) with the main backbone \_ n as precursor.以分子结构单元为[Si H2NH]n的全氢聚硅氮烷作先驱体,采用聚合物浸渍裂解法制备了三维石英织物增强氮化硅基复合材料(3DSi O2f/Si3N4)。
延伸阅读
为再结合熔融石英制品、熔融石英陶瓷制品分子式：CAS号：性质：又称为再结合熔融石英制品、熔融石英陶瓷制品或石英玻璃烧结制品。具有良好的化学稳定性。抗酸性和抗冲刷性强。高温机械强度大。热膨胀系数低。气孔率低。导电率低。但在1100℃以上长期使用时，制品中的石英会向方石英转变，使制品产生裂纹和剥落。以熔融石英为原料，经粉碎、成型、干燥、烧成而制得。制法有泥浆浇注法、蜡注法、捣打法、半干压法和等静压成型等。由于在烧成时收缩小，可以制得尺寸精确的制品。可用于制作耐酸容器、反应罐内衬耐酸部件等。冶金工业中用其制成浸入式水口，使用效果很好。
