高能研磨,high energy milling
1)high energy milling高能研磨
1.The ultrafine flake zinc powder can be obtained byhigh energy milling process through the control of mill rotating speed and atmosphere.研究在惰性气体保护下用高能研磨法制备超细鳞片状锌粉过程 ,考查原料、表面活性剂和研磨工艺对产品性能的影响。
2.Researched the preparation of floating Aluminiumpasten by newhigh energy milling.采用新型的高能研磨方法制备漂浮型铝银浆,研究了研磨工艺、设备和表面包覆剂对产品性能的影响,结果表明,采用复合包覆剂效果较好,漂浮型铝银浆平均粒度D5010-20μm,水遮盖面积2。
2)highenergymechanicalmilling高能机械研磨
1.The spinel type ZnFe2O4ferritepowder wassynthesizedfromthemixtureofZnOandFe2O3powdersbyhighenergymechanicalmilling.本研究通过高能机械研磨的方法直接将ＺｎＯ和αＦｅ２Ｏ３混合粉末合成为尖晶石型ＺｎＦｅ２Ｏ４铁氧体粉末。
3)grinding ability研磨性能
1.With the comparison between the grinding paste and the grinding powder,this research paper analyzed the factors influencing thegrinding ability of the phosphate rock.通过对磨浆与磨粉的比较,讨论了影响磷矿研磨性能的原因,介绍确定磷矿研磨性能的几种方法,探讨了确定磷矿研磨性能在过磷酸钙生产中应用。
英文短句/例句
1.Study on the Preparation and Polishing Performance of Bonded Magnetic Abrasive;粘结磁性磨料制备工艺及其研磨性能研究
2.Studies on the Grinding Behavior and Wear Resistance of Y-TZP/Al_2O_3 Ceramics;Y-TZP/Al_2O_3陶瓷磨削性能和耐磨性的研究
3.Study on grinding performance of soft diamond grinding wheel金刚石柔性磨轮磨削性能的实验研究
4.Synthetic Evaluating Investigation on Wear Resistant Properties of Several Wear Resistant Materials;多种抗磨材料抗磨性能综合评价研究
5.The Study on Running-in and Wear Properties of Crankshaft-bearing Shell of Diesel Engine柴油机曲轴-轴瓦磨合磨损性能研究
6.Study on Anti-wear and Reduce Friction Performance of Surface Modified Nano-SiO_2表面修饰纳米SiO_2的抗磨减磨性能研究
7.Study on grinding performance of nano-SiO_2 modified flexible diamond wheel纳米SiO_2改性金刚石柔性磨轮磨削性能的研究
8.Study on the Processing and Abrasive Wear-resistance of Ductile Cast Iron with Low Carbon and Medium Manganese低碳中锰抗磨球墨铸铁的研制及其磨粒磨损性能研究
9.Study on Abrasion Resistance of Laminate Flooring强化木地板耐磨性能及国产化耐磨纸的研究
10.Study on performances of CBN grains for quick-point vitrified CBN wheel快速点磨陶瓷CBN砂轮磨料性能的实验研究
11.Study on Abrasive Resistance of Haystellite7 Alloy Coating Prepared by Flame Remelting火焰喷熔Haystellite7合金涂层耐磨粒磨损性能研究
12.Preparation and Solid-Liquid Erosive Wear Property of Sialon-Sic Ceramic CompositeSialon-SiC耐磨陶瓷的制备及液固冲蚀磨损性能研究
13.Friction and Wear Properties of KM-type Lubricating Oil Anti-wear Additive for Diesel Locomotive内燃机车KM型抗磨添加剂的摩擦磨损性能研究
14.High-performance frition and wear prototyping based on wear sleady-state基于磨耗稳定态的高性能摩擦磨损实验机研制
15.The Research on the Precision Grinding and Ground Wear Performance for Nanostuctured WC/Co Coating;纳米结构WC/Co涂层的精密磨削及磨削后磨损性能研究
16.A Study on Impact Abrasive Wear Resistance and Wear Mechanism of Fe-B-C AlloysFe-B-C合金冲击磨料磨损性能及磨损机制的研究
17.A Study on Impact Abrasive Wear Resistance and Wear Mechanism of New-Style Martensitic Steel新型马氏体钢冲击磨料磨损性能及磨损机制的研究
18.Study on Friction and Wear Performonce of BaO·6Fe_2O_3 Acrylonitrile-Butadiene Magnetic Rubber;BaO·6Fe_2O_3丁腈磁性橡胶摩擦磨损性能研究
相关短句/例句
highenergymechanicalmilling高能机械研磨
1.The spinel type ZnFe2O4ferritepowder wassynthesizedfromthemixtureofZnOandFe2O3powdersbyhighenergymechanicalmilling.本研究通过高能机械研磨的方法直接将ＺｎＯ和αＦｅ２Ｏ３混合粉末合成为尖晶石型ＺｎＦｅ２Ｏ４铁氧体粉末。
3)grinding ability研磨性能
1.With the comparison between the grinding paste and the grinding powder,this research paper analyzed the factors influencing thegrinding ability of the phosphate rock.通过对磨浆与磨粉的比较,讨论了影响磷矿研磨性能的原因,介绍确定磷矿研磨性能的几种方法,探讨了确定磷矿研磨性能在过磷酸钙生产中应用。
4)mill capacity研磨能力
5)Capable of grinding.能研磨的
6)high speed lapping高速研磨
1.Through experiments ofhigh speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.本文通过实验研究了在固着磨料高速研磨中,研磨压力对工件已加工表面粗糙度的影响。
延伸阅读
Anglelapping角度研磨angle lapping 的目的是为了测量junction的深度，所作的芯片前处理，这种采用光线干涉测量的方法就称之angle lapping。公式为xj=λ/2 nf即junction深度等于入射光波长的一半与干涉条纹数之乘积。但渐渐的随着vlsi组件的缩小，准确度及精密度都无法因应。如srp(spreading resistance prqbing)也是应用angle lapping的方法作前处理，采用的方法是以表面植入浓度与阻值的对应关系求出junction的深度，精确度远超过入射光干涉法。
