超声波铣削,ultrasonic vibration milling
1)ultrasonic vibration milling超声波铣削
1.Theultrasonic vibration milling device and semi-artificial thermocouple temperature measurement devices are developed.本文以研究超声波铣削加工工艺为目的,设计了铣削SiCp/Al复合材料超声波振动加工系统和半人工热电偶测温装置,并利用Labview程序平台设计了测温程序;建立了超声振动切削温度场的传热模型和超声振动切削力的理论模型,并通过实验对理论模型进行了验证;利用自制的超声波铣削系统对加工过程中的切削温度的变化规律、切削力的变化规律状况进行了试验研究;最后通过工具显微镜,分析了SiCp的变形破坏方式、工件表面的微观结构和切削过程中的刀具磨损状态。
英文短句/例句
1.Study on the Principle and Relevant Technology of Ultrasonic Milling;超声波铣削加工原理及相关技术研究
2.Study on Ultrasonic Milling Mechanism of SiCp/Al Composites超声铣削SiCp/Al复合材料的机理研究
3.The Basic Technology Research on the Ultrasonic Milling of CFRP碳纤维复合材料超声振动铣削的技术基础研究
4.Research on the surface characteristics in ultrasonic milling of CFRP超声振动铣削碳纤维复合材料表面特征研究
5.On Power Milling and Judgment of Headstock Malfunction;铣床强力铣削与铣床主轴箱故障“异声”判断
6.Investigation and Simulation of Ultrasonic Vibration Assisted Electrical Discharge Milling in Gas;基于气体介质的超声振动辅助放电铣削加工技术仿真研究
7.Research on System Esdablishment and Vibration Mode Simulation of Ultrasonic Vibration Micro-Milling微铣削超声振动系统的建立及其振动模式的仿真研究
8.Experimental Study on Ultrasonically Assisted Turning Slender Shaft细长轴超声波辅助振动车削试验研究
9.Theoretical and Experimental Studies on the Ultra-Precision Face-milling of Engineering Ceramics;工程陶瓷的超精密铣削机理与实验研究
10.Research on the Machine Tool of Electrical Discharge Milling Nonconductive Superabrasives非导电超硬材料电火花铣削机床的研究
11.Experimental Study on the Cutting Performance of Vertical Milling Cutter with Inner Cooling Front Wave-Form Cutting Edge内冷前波形刃立铣刀切削性能的试验研究
12.Research On Grinding Technology of Solid Hardmetal Milling Cutter with Waved Edges整体硬质合金波刃铣刀磨削加工的工艺研究
13.High- speed Milling Monitoring & Signal Analysis Based on Audio Detection基于声音的高速铣削过程监控和信号分析
14.AE-Based Monitoring Technology of High Speed Milling Process基于声发射信号的高速铣削过程监测技术
15.An Investigation on Material Micro-removal in Ultrasonic Gear Honing and Contact Analysis;超声波平行轴硬珩齿微观切削过程的研究及其接触变形分析
16.Experimental research on optimizing processing parameters of ultrasonic assisted creep feed grinding ceramics陶瓷材料超声波辅助蠕动磨削工艺参数优选试验研究
17.Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel超声硬切削45淬硬钢的切削温度研究
18.Sounds are classified into two kinds: sonic and ultrasonic.声波分为两类，即普通声波与超声波。
相关短句/例句
ultrasonic milling超声波铣削加工
1.This paper firstly analysed material removal mechanism ofultrasonic milling under three motions of tool oscillation and rotation simultaneously,and feed movement of th.超声波铣削加工适于硬脆材料复杂型腔的加工,加工中影响材料去除率的因素很多,为了优化加工参数以及更好地控制加工过程,研究了各种加工参数对材料去除率的影响规律。
3)Ultrasonic Vibration Cutting超声波振动切削
1.This paper deals with not only the roughness of the surface of GFRP and deoxidised copper but also the tool life of hardened steel and molybdenum by ultrasonic vibration cutting with artificial superhard tool.研究了人造超硬刀具超声波振动切削纤维增强复合塑料和无氧铜的表面粗糙度以及淬火钢和金属钼的刀具耐用度，得到了一些重要的结果。
4)ultrasonic vibration turning超声波振动车削
1.The paper gives an analysis of the high frequency vari-speed characteristics in the unseparated typeultrasonic vibration turning (UVT) and proposes a mechanism of chatter suppression with the unseparated type UVT.详尽地分析了不分离型超声波振动车削的高频变速特征,提出不分离型超声波振动车削抑制颤振的机理,并用实验予以验证,这是对传统超声波振动切削理论的突破。
2.This paper has brought to light the microcosmic mechanism ofultrasonic vibration turning(UVT)reducing chatter bay means of AMRAY-1000B Scanning Electron Microscope(SEM).作者应用AMRAY-1000B型扫描电镜(SEM)揭示出超声波振动车削抑制颤振的微观本质。
5)Ultra-high speed milling超高速铣削
1.Ultra-high speed milling and its application in machining of high hardened steel;超高速铣削及其在高硬度钢加工中的应用
6)ultra-precision milling超精密铣削
延伸阅读
超声超声UltrasofliCS是指超出人耳听力范围的高频声(频率超过20000Hz）。超声具有与一般声音共同的物理性质，还具有一些其他重要的物理特性，如能够成束发射，直线传导，方向性好。传导过程中遇有声阻抗不同的反射界面时产生反射、折射、聚焦和散焦等现象。用于临床诊断的超声频率一般为2～7.5MHz。频率越高，对组织结构的分辨力越强，但远场声能容易被组织吸收、衰减，不易穿透较深的层次。
