肘杆机构,elbow-bar mechanism
1)elbow-bar mechanism肘杆机构
1.Optimization design ofelbow-bar mechanism in injection molding machine based on genetic algorithm基于遗传算法的注塑机肘杆机构优化设计
2.By taking the original errors as stochastic variables,the reliability of theelbow-bar mechanism of automatic die cutting machine was analyzed and calculated in three instances,namely only in the presence of the error of bar length,only in the presence of joint-gaps of hinge or in the presence of the both of them.将各原始误差视为随机变量,对全自动平压平模切机肘杆机构分别在仅有杆长尺寸误差或铰链间隙误差以及两种误差同时存在的3种情况下,对其输出运动误差进行了分析与综合,建立了机构运动精度可靠性分析模型。
英文短句/例句
1.Dynamic Characteristic Research of Elbow-Bar Framework of MW1050 Automatic Blocking Die-Cutter;MW1050自动烫金模切机肘杆机构动态特性研究
2.Optimization Design and Finite Element Analysis of Elbow-Bar Mechanism of Moulding Machine;模切机肘杆机构的优化设计及有限元分析
3.The Elasto-Dynamics Study on Dual-Elbow-Bar Mechanism of the Platen Die-Cutting Machine;平压平模切机双肘杆机构的弹性动力学研究
4.Kinematics and Quasi-statics of Dual-elbow-bar Mechanism of Die-cutting Machine模切机双肘杆机构的运动学与动态静力学分析
5.Optimization design of elbow-bar mechanism in injection molding machine based on genetic algorithm基于遗传算法的注塑机肘杆机构优化设计
6.Precision Analysis and Reliability Design of Elbow-Bar Mechanism of Automatic Die Cutting Machine;全自动平压平模切机肘杆机构精度分析及可靠性设计
7.Discussion of elasticity and mechanical properties of elbow rod mold closing for injection molding machine (part four)注塑机肘杆合模机构弹性力学性能的探讨(四)
8.Discussion of elasticity and mechanical properties of elbow rod closing mold for injection molding machine (part three)注塑机肘杆合模机构弹性力学性能的探讨(三)
9.Discussion of elasticity mechanics properties of elbow rod fitting model for injection molding machine (part two)注塑机肘杆合模机构弹性力学性能的探讨(二)
10.Discussion of elasticity mechanics properties of elbow rod fitting model for injection molding machine (part one)注塑机肘杆合模机构弹性力学性能的探讨(一)
11.Researches on speed-transmission ratio of double-toggle clamping mechanism肘杆合模机构运行速度传动比性能的分析研究
12.On Dynamic Performance Analysis and Design of a Double-Knuckle Servo Mechanical Press双肘杆伺服压力机样机设计与动态性能分析
13.Global Dimensional Optimization of Double-Knuckle Servo Mechanical Press Based on Performance Atlases over Bounded Solution Space基于性能图谱的双肘杆伺服压力机杆系全局优化设计
14.Optimization Design for Oblique Five Hinge Joint-Double Toggle Clamping Unit of Injection Molding Machine;注射机五孔斜排双曲肘合模机构的优化设计
15.Although the Egyptian had a spear like a weaver"s rod in his hand, Benaiah went against him with a club.埃及人身高五肘，手里拿着枪，枪杆粗如织布的机轴。
16.Research on the Method of UG-Based Dynamics Simulation for Servo-Press基于UG的肘杆式伺服压力机动力学分析方法研究
17.Variation laws of connecting rod curves for five bar and similar four bar mechanism类四杆五杆机构连杆曲线的变化规律
18.A device or an apparatus with a toggle joint.肘结机件有肘节的装置或器具
相关短句/例句
elbow-bar framework肘杆机构
1.In this article,elbow-bar framework of the Die-Cutting system of Blocking Die-Cutter was analyzed with numerical method, and the author also designed an experiment to verify the theoratical analysis.采用数值分析的方法对肘杆机构进行了分析,并针对分析结果设计实验,通过现场实测取得数据,验证了理论分析的正确性。
3)dual-elbow-bar mechanism双肘杆机构
1.Motion analysis and optimum design of thedual-elbow-bar mechanism of the die-cutting machine;模切机双肘杆机构运动分析与优化设计
2.Motion analysis of thedual-elbow-bar mechanism of the die-cutting machine based on the loop method;基于回路法的模切机双肘杆机构运动分析
3.The simulating motion curve of thedual-elbow-bar mechanism was drawn and its motion characteristics were analyzed.基于回路法对自动平压平模切机的双肘杆施压机构进行运动分析,利用梯度法进行数值求解,绘出双肘杆机构运动仿真曲线,并进行运动特性分析,建立优化数学模型,进行优化设计。
4)crank-elbow bars mechanism曲柄肘杆机构
1.The parameters of thiscrank-elbow bars mechanism are given and the distinguishing features and performances of this opening-closing die mechanism are discussed.根据920SEF模切烫金自动机合模机构的工作要求,提出了采用对称的曲柄肘杆机构作为920SEF模切烫金自动机的合模机构;并给出了该曲柄肘杆合模机构结构参数以及工作滑块(动平台)的位移与曲柄(曲轴)转角的数值关系,最后分析和总结了这种合模机构的结构特性。
5)toggle clamp肘杆式合模机构
1.Through analyzing and researching intoggle clamp for manifold models (including back lever model, height of the crosshead, size of middle lever, locking final corner, clamping thrust corner and ratio of the levers" length), the writer is discussing for better model of presented abovetoggle clamp in the paper.通过对肘杆式合模机构的多种型式 (包括后杆型式、十字头高度、中间杆尺寸、锁模最终角、合模推力角和杆长比 )的分析和研究 ,探讨了目前该机构中的较佳模式。
6)the Dual-elbow-bar mechanism双肘杆施压机构
延伸阅读
国有金融机构监事会的定期接受国有金融机构报告的职权国有金融机构监事会的定期接受国有金融机构报告的职权：国有金融机构应当定期、如实向监事会报送财务报告、资金营运报告，并及时报告重大业务经营活动情况，不得拒绝、隐匿、伪报。―――――《国有重点金融机构监事会暂行条例》第13条
