层状陶瓷,laminated ceramics
1)laminated ceramics层状陶瓷
1.Study on SiC/Silaminated ceramics fabricated from paper by laminated design;纸叠层设计制备SiC/Si层状陶瓷研究
2.The surface flaws of different sizes were introduced into SiC/BNlaminated ceramics by Vickers indentation method.采用压痕法在SiC/BN层状陶瓷试样的表面引入不同尺寸的表面裂纹,利用三点弯曲测量含裂纹试样的极限断裂应力,研究了不同尺寸的表面裂纹对层状陶瓷断裂强度的影响;根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。
英文短句/例句
1.TiB_2/BN Laminated Ceramics Composites Maked by Spark Plasma Sintering System;放电等离子烧结法制备TiB_2/BN层状陶瓷
2.Research of Nonlinear Elastic Deformation of MAX Phases三元层状陶瓷MAX相的非线性弹性研究
3.Mechanical Behavior Mechanisms of Al_2O_3/Al Multilayer CeramicsAl_2O_3基片/Al层状陶瓷的力学行为机理
4.Mechanical Properties of Al_2O_3/Al Multilayer CeramicsAl_2O_3基片/Al层状陶瓷的力学性能研究
5.Effect of Ion Substitution of PbBi_2Nb_2O_9 Bismuth Layered Ceramics on the Dielectric Properties铋层状陶瓷的离子取代对介电性能的影响
6.Study of the ZrO_2/Al_2O_3 Laminated Compound Ceramics;ZrO_2/Al_2O_3系层状复合陶瓷材料的研究
7.Research progresses in Bismuth Layer Structure Lead-free Piezoelectric Ceramics;铋层状结构无铅压电陶瓷的研究进展
8.The Research on the Producing and Mechanical Character of Laminated Ciramic层状复合陶瓷的制备与机械性能研究
9.Present and Evolution of Laser Cladding Ceramic Coating激光熔覆陶瓷涂层的研究现状及发展
10.STUDY ON PREPARATION AND PROPERTIES OF B_4C/TiB_2 LAMINATESB_4C/TiB_2层状复合陶瓷的制备与性能研究
11.Synthesis and properties of new layered Ti_3AlC_2 ceramic新型层状Ti_3AlC_2陶瓷的制备及性能研究
12.Study on Processing and Properties of Bismuth Layered Structure SrBi_4Ti_4O_(15) Piezoelectric Ceramics;铋层状SrBi_4Ti_4O_（15）压电陶瓷的制备与性能研究
13.Study on Properties of ZrO_2-Al_2O_3 Laminated Ceramics;氧化锆—氧化铝层状复合陶瓷的性能研究
14.Design, Fabrication and Application of Multilayered Ceramic Nozzles层状复合陶瓷喷嘴的设计制造及其应用研究
15.Oxidation Behavior of AlN and AlN/BN Laminated Composites Ceramics at High TemperaturesAlN和AlN/BN层状复合陶瓷的高温氧化行为
16.Effects of α-Si_3N_4 seeds on properties of porous laminated silicon nitride ceramicsα-Si_3N_4晶种对层状多孔氮化硅陶瓷性能的影响
17.Study on Ferroelectric and Ferromagnetic Properties of Bismuth Layer Structured Ceramics Bi_2SrNdNb_2FeO_(12)铋层状结构陶瓷Bi_2SrNdNb_2FeO_(12)铁电性能及磁性能研究
18.Numerical analysis of laminated ceramic composites by non-Fourier heat conduction非傅立叶模型层状复合陶瓷结构热传导分析
相关短句/例句
laminated ceramic层状陶瓷
1.In the present work,aqueous gelcasting-hot pressing technique to prepare oxide matrixlaminated ceramic composites by(using) Al_2O_3(YAG) as matrix layers and LaPO_4 as interfacial layers.重点研究工艺参数及界面层成分对层状陶瓷复合材料室温性能的影响。
2.Tribological behavior and wear mechanism of ZrO 2-Al 2O 3laminated ceramics under dry friction and water lubrication conditions were studied.结果表明 :相同条件下 ,层状陶瓷的摩擦系数和磨损率均低于单层陶瓷 ,根本原因在于层状陶瓷表面的压应力导致的韧性提高和磨损表面剪切应力的降低。
3)multilayer ceramics层状陶瓷
1.The SEM observation and analysis of the cross section and the crack propagation of themultilayer ceramics were done based on the mechanical properties of themultilayer ceramics researched in former work to explain mechanical behavior of themultilayer ceramics.在先前的工作的基础上,对层状陶瓷材料的横切面进行了SEM分析,并对层状陶瓷的断裂裂纹扩展方式进行了观察研究。
2.Themultilayer ceramics were prepared by screen-printing method to brush Al slurry on Al2O3 slices and heat treated in oxidizing enviroment.采用丝网印刷法在Al2O3基片上刷涂金属Al浆料,然后叠层在氧化环境中进行热处理,制备了不同层数的层状陶瓷材料,研究了Al2O3基片层数、热处理温度对层状陶瓷抗弯强度、断裂韧性和冲击功的影响,并与用AB胶制备的层状陶瓷进行了比较。
4)Ti3SiC2 layered ceramicTi3SiC2层状陶瓷
5)Bismuth layer type ceramics层状铋陶瓷
6)Ti_3SiC_2 ceramics层状Ti_3SiC_2陶瓷
延伸阅读
层状结构催化剂分子式：CAS号：性质：在层状结构物中层与层之间引进有机或无机的基因，从而具有催化作用的催化剂。其优点是可通过控制层间距(如0.5～4.0nm)，使反应物定向，以达到独特的反应物和产物选择性。层状结构材料可以用天然层状黏土或水滑石等改性，也可以用K2La2Ti3O10等起始层板材料分步交换制得。提高柱层状结构物的热稳定性和水热稳定性，目前还比较困难。
