抗弯,bending
1)bending[英][bend][美][b?nd]抗弯
1.Method for thebending design of concrete beam strengthened with carbon fibre reinforced plastics;外贴碳纤维增强材料加固混凝土梁的抗弯设计方法
2.Furthermore,this plan is testified to meet the request ofbending and shearing.经过验算,指出此方案各部分均满足抗弯、抗剪等要求。
3.Based on the experimental data,the formula for calculating thebending capacity of polypropylene fiber reinforced ferroconcrete slabs is also proposed.对32组共96块配筋聚丙烯纤维增强钢丝网混凝土板进行了抗弯试验,研究了配筋聚丙烯纤维增强钢丝网混凝土薄板在不同开裂状态下的抗弯承载力,建立了供设计应用的配筋聚丙烯纤维增强钢丝网混凝土薄板抗弯承载力计算公式,并对某一楼板结构采用普通钢筋混凝土和配筋聚丙烯纤维增强钢丝网混凝土两种材料进行了设计对比。
英文短句/例句
1.bending stiffness抗挠劲度,抗弯硬挺度
2.Seismic performance of moment connections between cold-formed steel sections冷弯型钢抗弯斜节点抗震性能试验研究
3.Analysis of Shear Resistance and Flexural Behavior of Composite Box Girders with Corrugated Steel Webs;波形钢腹板组合箱梁抗剪及抗弯分析
4.Research on Flexural Capacity of Cold-formed Thin-wall Steel-Concrete Composite Beam;冷弯薄壁型钢—混凝土组合梁抗弯承载性能研究
5.Study on flexural behavior of pre-cracked RC beams strengthened with externally bonded CFSCFS加固开裂混凝土受弯构件的抗弯性能研究
6.Flexural strength and elasticity decreased significantly with increasing wood content.4．含木率之增加降低了抗弯强度及抗弯弹性率至为显著。
7.Method of testing in bending strength of woodGB/T1936.1-1991木材抗弯强度试验方法
8.testing method of bending strength of fire brick耐火砖抗弯强度试验方法
9.Method for determination of the modulus of elasticity in static bending of woodGB/T1936.2-1991木材抗弯弹性模量测定方法
10.Test method for measuring flexure strength of silicon slicesGB/T15615-1995硅片抗弯强度测试方法
11.The Finite Element Analysis on the Bending Capacity of Prestressed Concrete Beams Strengthened;预应力混凝土梁抗弯加固有限元分析
12.The Experiment Research on Bending Capacity of the Three-Step-Energy-Saving CS Roof Slabs;三步节能CS屋面板抗弯性能试验研究
13.Experimental Research on the Bend Behavior of HRB400 Reinforced Concrete Beams;HRB400级钢筋混凝土梁抗弯性能研究
14.Study on Flexural Strengthening with CFRP Materials and Its Application in Highway Bridges;CFRP抗弯加固研究及其桥梁工程应用
15.Test Research of Concrete Beams Reinforced with CFRP Flexural Behavior;CFRP筋混凝土梁抗弯性能的试验研究
16.Study on Flexural Performance of Reinforced Concrete Beams Strengthened with FRP SheetsFRP加固钢筋混凝土梁抗弯性能研究
17.Experimental Study on Bendding Behavior of Timber Beams Rinforced by FRP SheetsFRP加固木梁抗弯性能的试验研究
18.The Study on Cross-section Flexural Properties of CFRP Reinforced Concrete BeamsCFRP增强混凝土梁正截面抗弯性能研究
相关短句/例句
bending resistance抗弯
1.The result shows the cement mortar with modified emulsion owns improvedbending resistance and compactness.研究结果表明:通过改变单体比例而合成的苯-丙乳液所配制的水泥砂浆,其抗弯性能可以得到很大改善,其密实性也大为提高。
2.In this paper, by considering the mechanics of materials and the design theory of the steel concrete structure, a revised design theory ofbending resistance and shear resistance for the concrete structure reinforced with GFRP was proposed, with the assumption that the concrete was firstly damaged and a modification factor was introduced.从材料力学和钢筋混凝土结构的设计理论出发 ,假设混凝土先受压破坏 ,引入修正系数 ,得到了修正后的玻璃纤维筋混凝土构件抗弯、抗剪设计理论 ,由此考察了玻璃纤维筋混凝土构件的脆性破坏机理和特性 。
3)bending strength抗弯
1.Application of AFRP in concrete beam reinforcement engineering was introduced,the calculations of shear strength andbending strength of concrete member coated with AFRP were described in detail,and practical reinforcement engineering example were given.介绍了芳纶纤维材料在混凝土梁加固工程中的应用,重点论述了外贴芳伦纤维混凝土受弯构件的抗剪和抗弯承载力计算,并列举了芳纶纤维的加固工程实例。
4)strengthening design of bending moment抗弯抗剪
5)flexing resistance抗弯强度，抗弯性
6)bending strength抗弯强度
1.The detecting system of stress wave velocity for laminated veneer lumberbending strength based on single chip;基于单片机的单板层积材抗弯强度应力波波速检测系统
2.Analysis onbending strength of PcBN composite;PcBN复合片抗弯强度的分析
3.Effect of pore-forming agents content onbending strength of SiC/Al composites;造孔剂含量对SiC/Al复合材料抗弯强度的影响
延伸阅读
抗弯强度分子式：分子量：CAS号：性质：见弯曲强度。
