铜钢复合材料,copper-steel clad material
1)copper-steel clad material铜钢复合材料
1.The process techniques,properties and connection ofcopper-steel clad material are introduced,the economic properties of galvanized steel,copper-steel clad material and copper are discussed,application ofcopper-steel clad material in ground grid of transformer substation are prospected.论述了铜钢复合新材料的生产工艺、性能及连接方式,并对接地用材料热镀锌钢、铜钢复合材料及铜进行了经济性分析,阐述了铜钢复合材料在变电站接地网的应用前景。
英文短句/例句
1.Copper-clad Material and Its Applicable Prospect in Substation Ground Grid铜钢复合材料及其在变电站地网中的应用前景
2.Study on the Preparation and Performance of Steel/aluminum, Copper/aluminum Composites;钢/铝、铜/铝复合材料的制备及性能研究
3.High Tensile Strength and High Conductivity In-Situ Deformation Composite of Copper-Steel;高强度高导电铜钢原位形变复合材料
4.Application of explosively welded copper/steel clad material in EDM铜/钢爆炸复合材料在电火花加工中的应用
5.STUDY ON THE PROCESS TECHNOLOGY AND PROPERTY OF THE TRILAMINATED POM COMPOSITES WITH STEEL BASIS聚甲醛钢背铜塑三层结构复合材料的加工工艺与性能研究
6.Research on Temperature Field of Layered Composites of Steel-Copper-Plastics under End-face Frictional Conditions;钢—铜—塑三层复合材料端面摩擦条件下的温度场研究
7.Study of Pure Copper Wires and Copper-iron Composites with High Strength and High Conductivity;高强高导纯铜线材及铜铁复合材料研究
8.Research Progress of Diamond-Cu Composite Material for Electronic Packaging电子封装材料用金刚石/铜复合材料的研究进展
9.Study on New Low-Electrical Contacted Compounded Material on Copper-Based;新型弱电铜基电触头复合材料的研究
10.The Fabrication and Test of Silver-copper Coated Graphite Composite;银—镀铜石墨复合材料的制备及测试
11.The Studies of Ester Substituted Copper Phthalocyanines and Their Composites;酯基取代酞菁铜及其复合材料的研究
12.Preparation and Research of Cu Nanoparticles/Paraffin Thermosensitive Composite Materials;纳米铜粒/石蜡温敏复合材料的研制
13.Preparation and Properties of High Density W-Cu Composites;高比重钨—铜复合材料制备及性能研究
14.Microstructure and properties of MoSi_2 particles dispersion strengthened copper-base compositeMoSi_2增强铜基复合材料的组织与性能
15.Preparation of Cu/diamond composites by spark plasma sinteringSPS方法制备铜/金刚石复合材料
16.Progress on Ceramic Particles Reinforced Copper-matrix Composites陶瓷颗粒增强铜基复合材料研究进展
17.The Research for Friction and Wear Property of C/Cu Composite碳/铜复合材料摩擦磨损性能的研究
18.Study on Rapid Prototyping Preparation Process of Molybdenum/Copper Composites钼/铜复合材料快速成型制备工艺研究
相关短句/例句
copper-steel back composite铜-钢背复合材料
3)copper/steel composite materials铜/钢复合材料
4)copper-stainless steel composites铜-不锈钢复合材料
1.By means of synergistic accelerated corrosion test and electrochemical measuring,the corrosion behavior ofcopper-stainless steel composites and Cu in HSO_(3)~(-)/Cl~- media was studied.采用选择腐蚀技术,提取了铜-不锈钢复合材料中的纤维相,并测定了纤维相电极电位。
5)steel-base copper-plastic compound material钢基铜塑复合材料
6)in-situ deformation copper-steel composite materials铜钢原位形变复合材料
延伸阅读
钯/铜复合材料分子式：CAS号：性质：由钯和铜形成的复合材料。不形成连续固溶体，亦无有序无序转变，导电率比传统的钯铜合金大大提高，随铜含量增加而呈直线上升，其值接近理论计算值。Pd/Cu18, Pd/Cu42,Pd/Cu60,Pd/Cu72的导电率分别为19.3m/Ω·mm2，31.4m/Ω·mm2，40.16m/Ω·mm2和45.6m/Ω·mm2。Pd/Cu42的理论值33.2m/Ω·mm2；Pd/Cu40合金的电导率仅为3m/Ω·mm2。Pd/Cu复合材料的硬度、屈服极限、抗拉强度和伸长率几乎与成分无关。它们的维氏硬度为882.6MPa。采用纤维复合方法制取。在铜管中装入5000根钯丝，经大变形量冷加工和中间退火而制成40.5-2mm的丝材。也可用钯片和铜片叠合卷紧挤压拉伸以及混合粉料用加热等静压方法。作汽车闪光灯继电器接点。
