钻机荷载,Drilling Rig Load
1)Drilling Rig Load钻机荷载
2)rig hook load钻机大钩载荷
1.Calculation method ofrig hook load on deepwater drilling platform深水钻井平台钻机大钩载荷计算方法
英文短句/例句
1.Calculation method of rig hook load on deepwater drilling platform深水钻井平台钻机大钩载荷计算方法
2.Numerical Simulation of Load Convey Mechanism of Large Diameter Super-Long Pile;大直径超长钻孔灌注桩荷载传递机理的数值模拟研究
3.Hoist the BOP stack with the hook and have an overall check.用钻机大钩提起防喷器组并进行全面检查。
4.Finite element analysis of drillwell hook using Pro/E and AMSYS基于Pro/E和ANSYS的钻机大钩强度有限元分析
5.STUDY OF THE LOAD ON THE JOURNAL BEARINGS OF THE TRICONE BIT BY THE METHOD OF ANALYSIS OF THE RANDOM PROCESS用随机过程分析方法研究牙轮钻头轴承载荷
6.Research on Vertical Bearing Behavior and Deformed Mechanism of Supper-long hole Bored Pile in Xi an;西安地区超长钻孔灌注桩竖向受荷承载性能及变形机理的研究
7.EXPERIMENTAL STUDY OF LOAD TRANSMISSION PROPERTY OF LARGE-DIAMETER BORED CAST-IN-SITU DEEP AND LONG PILE IN DIFFERENT SOIL LAYERS大直径深长钻孔灌注桩分层荷载传递特性试验研究
8.Engineering estimation methods of thermal load of airplane大飞机乘员舱热载荷的工程估算方法
9.Study on wind load shape factors for long-span hangar structures大跨度机库结构风荷载体型系数研究
10.Load combination on the structure and calculation for heavy port shiploader大型港口装船机结构载荷组合及计算
11.Model analysis of the petroleum drillwell based on ANSYS基于ANSYS的石油钻采大钩模态分析
12.Finite Element Analysis of Cutting Load of Geological PDC Coring Bit地质PDC取心钻头切削载荷有限元分析
13.Analysis of the Maximum Working Load on Large Span Pentahedral Machine Tool Beams大跨距龙门五面体机床横梁最大工作载荷分析
14.Study Bearing Capacity of Revolving Digging Cast-in-Place Bored Pile Through Load Transfer Method;荷载传递法确定旋挖钻孔灌注桩承载力的研究
15.A finite element calculation and analysis of the drilling floor of the 4000 m truck-mounted rig4000m车载钻机钻台的有限元计算与分析
16.The Stability Analysis of Elastic Beam in Large Deflection Subjected to Thermomechanical Load;热—机载荷作用下大挠度梁的动力稳定性分析
17.Research on Wind Loads and Wind-induced Responses of Large-span Aircraft Maintenance Hangars大跨度机库屋盖结构的风荷载及风振响应研究
18.Wind Rotor Load Simulation and Control of Large-Scale Wind Turbine System大型风力发电机组风轮载荷的仿真计算与控制
相关短句/例句
rig hook load钻机大钩载荷
1.Calculation method ofrig hook load on deepwater drilling platform深水钻井平台钻机大钩载荷计算方法
3)mobile rig车载钻机
1.Application and analysis of air-control disc auxiliary brake formobile rig;气控盘式辅助刹车在车载钻机中的应用分析
2.The Application of Mobile Rig in Geological Exploration车载钻机在地质勘探工程中的应用
4)stochastic loads随机载荷
1.For this purpose,several assumption are pre-determined, including a close relationship between the average andstochastic loadsof a single pick.截齿的载荷是确定连续采煤机截割工况和研究其截割性能的依据,根据对连续采煤机截割滚筒结构特殊性和工作条件复杂性的分析,通过假设单个截齿平均载荷与随机载荷的关系、截齿的受力分布类型以及硬质包裹体的接触概率,利用叠加原理,建立了在复杂煤层截割时,连续采煤机上处于截割断面不同位置的截齿的随机载荷的数学模型。
2.On the foundation of the theory which is about the single pick"s average load, analyzed loads"s probability distribution and relevance when a single pick cuts various coal rock, on this basis, Utilizing the stochastic process theory ,set up the mathematical model about the single pick"sstochastic loads.本文在单齿平均载荷理论的基础上，分析了单齿截割各种煤岩时载荷的概率分布和相关性，在此基础上，利用随机过程理论，建立了单齿随机载荷的数学模型。
5)Random Load随机载荷
1.Simulation study of random loads on a cutting head of roadheader;掘进机截割头随机载荷的模拟研究
2.Statistics analysis and simulation of random loads for bridges;桥梁随机载荷数据采集和数值模拟
3.Model to realize the remote parameter control of random load;随机载荷的远程参数控制实现的模型
6)random load随机荷载
1.Structural responses torandom load and coherent scale;随机荷载的结构响应与相干尺度
2.Under the consideration of the random property of physical parameters of strucral material and its loads, computing expression of numerical feature of dynamic response is developed and a solving process of dynamic response analysis for structure with randion parameters underrandom loads is advanced.研究了结构动力响应的概率分析方法 ,推导了结构物理参数和作用荷载幅值同时具有随机性时结构动力响应随机变量的数字特征的计算表达式 ,提出了随机荷载激励下随机参数结构动力响应分析的求解方
3.Strength degradation model is applied for predicting shear fatigue life of asphalt mixture underrandom loading spectrum.使用强度退化模型预估随机荷载谱下的沥青混合料剪切疲劳寿命,其结果与实验结果相近。
延伸阅读
212吉普车车载单兵导弹系统212吉普车车载单兵导弹系统 212吉普车车载单兵导弹系统从电视军事频道中我们经常可以看到，我陆军各摩托化步兵师(旅)高炮团(营)编制内的防空导弹连，拥有大量的北京212军用越野吉普车。电视画面中经常出现我防空军战士乘坐该车高速机动演练的镜头，战士和吉普车上都披有伪装网，到达发射阵地后，导弹射手，肩扛导弹，直立在车箱中，瞄准空中目标发射导弹，有时一辆车可载有2名导弹射手各肩扛1枚单兵导弹准备发射
