温度收缩,temperature shrinkage
1)temperature shrinkage温度收缩
1.Research of double expansive resources admixture compensatingtemperature shrinkage of mass concrete;补偿大体积混凝土温度收缩的双膨胀源膨胀剂的研究
2.The dry shrinkage,temperature shrinkage and freezethaw cycling resistance of cementstabilized and fly ashlime macadam base were compared through experiments, and the factors influencing the deformation properties of cementstabilized macadam base were investigated.研究了水泥稳定碎石和二灰稳定碎石用作路面基层材料时的干燥收缩、温度收缩和抗冻融循环性,并探讨了影响水泥稳定碎石上述性能的因素及其规律。
3.The basement wall of high building is very easy to appeartemperature shrinkage cracking in early age due to super-long shear walls and stronger restraints.高层建筑物地下室混凝土侧墙沿水平方向长而薄,其上部与下部分别受梁板与基础底板约束,在混凝土早期易出现温度收缩裂缝。
英文短句/例句
1.Temperature Shrinkage Stress Analysis and Crack Control for Basement Wall;地下室侧墙温度收缩应力分析与裂缝控制
2.Study on the Temperature Contraction Crack Control in Reinforced Concrete Cast-in-place Floor Slabs;钢筋混凝土楼板温度收缩裂缝的控制研究
3.On measures for controlling temperature shrinkage cracks on concrete poured concrete slab of some project控制某工程混凝土现浇板温度收缩裂缝的措施
4.On suggestions for prevention and reduction of temperature shrinkage cracks on super-long concrete防止和减轻超长混凝土温度收缩裂缝的建议
5.Research on Crack Control for Temperature and Shrinkage of Prestressed Concrete Beam-Slab Structure of Extra-length;超长预应力混凝土梁板结构温度收缩裂缝控制研究
6.The Construction Technology of CRFG Office Buildint Raft Board Mass Concrete Temoerature Contraction Crack Control;中铁一局办公楼筏板大体积混凝土温度收缩裂缝控制施工技术
7.Study on the Control Measures of Temperature and Shrinkage Cracks for Ceramsite Concrete-block Building;陶粒混凝土砌块建筑温度收缩裂缝控制措施的研究
8.The Investigation of Temperature Crack Controlling for Large-volume Concrete Foundation Slab;大体积钢筋混凝土基础板温度收缩裂缝的控制研究
9.temperature contraction of pipes管道因温度变化收缩
10.Research on shrinkage temperature control in shrinking film packaging based on adaptive fuzzy method热收缩膜收缩温度的自适应模糊控制研究
11.The initial shrinkage temperature and the shrinkage change little with the increase of heating rate.升温速率增大,坯片开始收缩的温度及收缩率几乎不变。
12.When the cellular aluminum alloy is heated above710(° C), volume shrinkage occurs and the ratio of volume shrinkage increases with the temperature.胞状铝合金在高于710°的温度下加热,其体积发生收缩,且收缩率随温度升高而增大.
13.Shrinkage stress was found to increase linearly with cure temperature.我们发现收缩应力随固化温度直线增加。
14.Calculation of Shrinkage Compensation Concrete Wall Stress Considering Temperature History Effect考虑温度历程的补偿收缩混凝土墙应力计算
15.Research on Solution of the Temperature and Shrinkage Crack Control in Overlong Concrete Structure;超长混凝土结构温度及收缩裂缝控制方法研究
16.An Experimental Study on Temperature Dependence of Autogenous Shrinkage of High Strength Mortar;高强水泥胶砂自收缩温度依存性的实验研究
17.Status Quo and Problems of Concrete Structures Temperature and Shrinkage Cracking Control;混凝土结构温度及收缩裂缝控制的现状和问题
18.Analysis on the cast-in-place floor temperature-shrinkage crack mechanism and anti-crack measures浅析现浇板温度—收缩裂缝机理及抗裂措施
相关短句/例句
thermal shrinking温度收缩
1.Aiming at thethermal shrinking and dry shrinking of semi-rigidity base course.针对半刚性基层易产生干燥收缩和温度收缩的问题,采用水泥稳定砾石、水泥稳定碎砾石、水泥稳定大粒径砾石的方案对半刚性基层的开裂问题进行了研究,并通过对试验路段的观测,分析了三种材料的抗裂性能。
3)thermal contract温度收缩
1.Since advances in cement and concrete technology and structural engineering,cracking phenomenon more and more results fromthermal contract and autogenous shrinkage.然而 ,随着对水泥与混凝土工程技术的不断研究发现 ,温度收缩和自身收缩的是引起开裂的主要原因。
4)shrinkage temperature收缩温度
1.Theshrinkage temperature(Ts) of the leathers tanned by the above agents were tested.用红外光谱(FT-IR)分别证实了它们特有的官能团的存在;并对这些无铬鞣剂的分子结构进行计算机模拟,尝试从分子尺寸的角度解释收缩温度的差异。
2.When the determination criterion of theshrinkage temperature of leather is carried out,we find that there is too many problems.皮革收缩温度是检验皮革产品耐用性能的一个重要指标,但是在执行QB/T2713-《皮革收缩温度的测定》时,却发现存在很多问题。
3.At the same time,theshrinkage temperature(Ts),physical and machine properties of the leather have been tested.同时对鞣后革的收缩温度、物理机械性能等进行了测试。
5)temperatute and shrinrage温度与收缩
6)temperature and shrinkage温度及收缩
1.To find the reasonable values it is necessary to take account of two factors: 1) the stresses caused bytemperature and shrinkage are less than the allowable stresses; 2) the composite cracking width has to be within the allowable range.为此,提出伸缩缝间距应能保证温度及收缩应力不大于容许应力,且使综合裂缝宽度处于规范允许范围内的思想。
延伸阅读
皮革收缩温度分子式：CAS号：性质：皮革的一项特征指标。表征皮革的鞣制程度和耐湿热稳定性。用收缩温度测定仪测定。简易测定仪由一只500ml烧杯、电炉、温度计、刻度盘、试样夹及与之连接的指针等组成。测定时将试样小条夹好放入装水的烧杯内，旁悬温度计，以匀速加温至试样受热到某一温度发生突然收缩，此时指针从记得度盘偏离，记录此瞬间的温度。如要测定收缩温度于100℃的试样，则需采用较复杂的水加压力类型的仪器。规定铬鞣鞭牛皮正鞋面革的收缩温度≥95℃。
