激光熔化沉积,laser melting deposition
1)laser melting deposition激光熔化沉积
1.Microstructures and mechanical properties of ultra-high strength steel 300M fabricated bylaser melting deposition;激光熔化沉积300M超高强度钢组织与力学性能
2.Directional rapidly solidified Ni-base superalloy Rene95 with ultra-fine columnar grain structure was produced by thelaser melting deposition (LMD) manufacturing process.采用激光熔化沉积定向快速凝固工艺,制备出了具有快速定向生长微细柱晶组织的Rene95高温合金板状试样,其一次枝晶间距约为7μm、枝晶间完全无γ/γ′共晶组织析出。
3.Do experiments of GH163 high temperature alloy powderlaser melting deposition.进行了激光熔化沉积成形GH163高温合金粉末条状试样实验,研究了激光脉宽、激光重复频率、扫描速度、送粉速率四个工艺参数对条状试样熔宽和熔高的影响。
英文短句/例句
1.Microstructure and Properties of Laser Direct Deposited TA12 Titanium Alloy激光熔化沉积TA12钛合金的组织及性能
2.Microstructure and mechanical properties of laser melting deposited titanium alloy激光熔化沉积TC2钛合金显微组织及力学性能
3.Microstructure Features of Laser Deposited Ti-6Al-2Zr-Mo-V Alloy激光熔化沉积Ti-6Al-2Zr-Mo-V钛合金组织特征研究
4.Solidification Microstructure and Mechanical Properties of Laser Direct Deposited Rene95 Nickel Based Superalloy激光熔化沉积Rene95镍基高温合金的凝固组织及力学性能
5.Electrophoretic Deposition and Laser Cladding Manufacture Cermets Composite Coating电泳沉积-激光熔覆金属陶瓷复合涂层
6.Research on Jet Electrodeposition and Laser Remelting Nanocrystalline Nickel Coating;喷射电沉积—激光重熔复合技术制备纳米晶镍沉积层工艺试验研究
7.Experimental Research on Photomask Repair System Using Laser Induced Chemical Vapor Deposition(LCVD) Method;激光化学气相沉积光掩模版修复系统的研究
8.Studies on the Character of Metal Material Surface Machining by Composite Electrodeposition and Laser Cladding Strengthening;金属材料表层复合电沉积及激光强化工艺研究
9.Research on ZnO and the Related Multilayers Grown by Pulsed Laser Deposition脉冲激光沉积氧化锌及其相关多层膜的研究
10.An Investigation of Laser Alloying and Laser Cladding on Magnesium Alloys;镁合金激光合金化与激光熔覆的研究
11.Photocatalytic Activity of Nanostructured TiO_2 Films Deposited by PLD;脉冲激光沉积纳米氧化钛薄膜及其光催化性能的研究
12.Preparation and Optical Properties of Nanocrystalline Silicon Carbide Films with Pulse Laser Deposition;纳米碳化硅的脉冲激光烧蚀沉积及其光学特性研究
13.Structures and Optical Properties of ZnO Thin Films Fabricated by PLD;脉冲激光沉积氧化锌薄膜的组织结构与光学性能
14.Process Optimization for 316L Stainless Steel by Fiber Laser Selective Melting光纤激光选区熔化316L不锈钢工艺优化
15.Pulsed Laser Deposition of TiO_2-based Composite Films and Optical Properties;激光沉积TiO_2基复合薄膜及其光学特性
16.Study on Plasma Evolution and Film Growth in Pulsed Laser Deposition;脉冲激光沉积技术中等离子体演化及薄膜生长的模拟研究
17.Study on the Pulsed Laser Deposited Process, Structure-controlling and Properties of Iridium Oxide Thin Films;氧化铱薄膜的脉冲激光沉积、结构控制及其性能研究
18.Selective Electroless Plating of Copper by Laser and a Mathematical Model for Deposition;激光诱导选择性化学镀铜及沉积过程的数值模拟
相关短句/例句
laser melting deposition manufacturing激光熔化沉积
1.The corrosion resistant ultrahigh strength steel AerMet 100 with thin plate form was fabricated bylaser melting deposition manufacturing.利用激光熔化沉积技术制备了AerMet 100耐蚀超高强度钢薄壁板状试样。
3)laser direct deposition激光熔化沉积
1.Thin wall samples from Rene95 nickel based superalloy were prepared bylaser direct deposition.采用激光熔化沉积方法制备出Rene95镍基高温合金薄壁样,分析了沉积态的凝固组织,并进行了热处理和力学性能测试。
2.Thin wall samples from TA12 titanium alloy have been prepared on TA15 substrates bylaser direct deposition of coaxially fed metallic powders under protective gas.结果表明,激光熔化沉积的TA12钛合金的内部组织致密,沉积材料与基体为完全冶金结合;激光熔化沉积TA12钛合金为等轴晶组织,晶粒内部为不同取向的细小片层α相与少量β相组成的网篮状魏氏组织,随着激光功率的增加,原始β-Ti晶粒的尺寸稍许增大;沉积状态下沿激光扫描运动方向室温及550℃高温下的拉伸强度均达到了退火棒材的要求。
4)laser clad deposition激光熔覆沉积
1.Functional gradient materials of 316L stainless steel to Stellite31 cobalt based super-alloy have been successfully prepared throughlaser clad deposition with in-situ mixing these two powders and gradually changing their feeding ratio.采用激光熔覆沉积方法,在送粉时通过原位混合316L不锈钢和Stellite31合金两种粉末并改变两种粉末的比例,直接制备出316L不锈钢-Stellite31梯度功能材料。
5)melting deposition熔化沉积
1.Improving efficiency of hybrid prototyping based on metalmelting deposition and 5-axis milling提高金属熔化沉积与五轴铣削复合成形效率
6)laser deposition激光沉积
1.The behaviors of the Nb,Ti,Al mixed powder stream concentration from a coaxiallaser deposition nozzle and the molten pool inlaser deposition process in the controlled environment chamber have been observed and analyzed with a charge coupled device(CCD) camera.根据微粒光散射理论对CCD拍摄的粉末流图像进行分析,得出了不同位置处粉末流的分布模型,并结合实验获取了用于激光沉积的同轴送粉喷嘴到沉积表面的适用距离区间。
2.Buffer layers of MgO(or CeO2)were first deposited on silicon substrates,and then BaTiO3(BTO)ferroelectric films were formed again by pulsedlaser deposition.采用脉冲激光沉积方法,在硅基片上先沉积 MgO 或 CeO2缓冲层后再制备 BaTiO3 (BTO)铁电薄膜。
3.Nanocomposite films composed of Ag particles embedded in BaTiO_3 matrix were grown on MgO(100) substrates by pulsedlaser deposition.在MgO(100)基片上利用脉冲激光沉积技术制备了掺有Ag纳米颗粒的BaTiO3复合薄膜。
延伸阅读
激光化学气相沉积分子式:CAS号:性质:利用激光束的光子能量激发和促进化学气相反应的沉积薄膜方法。在光子的作用下,气相中的分子发生分解,原子被激活,在衬底上形成薄膜。这种方法与常规的化学气相沉积(CVD)相比,可以大大降低衬底的温度,防止衬底中杂质分布截面受到破坏,可在不能承受高温的衬底上合成薄膜。与等离子体化学气相沉积方法相比,可以避免高能粒子辐照在薄膜中造成损伤。本方法所用设备是在常规的化学气相沉积设备基础上添加激光器、光路系统及激光功率测量装置。用本方法制备的SiO2及Si3N4薄膜时,衬底温度可低至380℃。