100字范文,内容丰富有趣,生活中的好帮手!
100字范文 > 橡胶类材料 rubber-like material英语短句 例句大全

橡胶类材料 rubber-like material英语短句 例句大全

时间:2024-06-16 04:58:36

相关推荐

橡胶类材料 rubber-like material英语短句 例句大全

橡胶类材料,rubber-like material

1)rubber-like material橡胶类材料

1.This paper contains an asymptotic finite-deformation analysis about the elastostatic field near the crack-tip in an incompressrubber-like material.本文对平面应变情况下不可压缩橡胶类材料裂纹尖端弹性场进行了有限变形分析。

2.With the constitutive equation supplied by Knowles and Sternberg and the sector division method the large deformation analysis of stress singular field near the notch, a typical defect ofrubber-like material under the condition of plane strain is performed.给出了相应的曲线,揭示了橡胶类材料缺口附近 的应为奇异性与缺口角度的关系。

3.For different material constants and different notch angles,the stress-strain curves of imcompressiblerubber-like material are given and the dominant behavior of stress and straim near the notch-co.借助于新的应变能函数和变形模式,推出了缺口顶端场各区的渐近方程,得到了顶端的完整描述本文结果表明,在靠近缺口顶端处,应力具有R-λ[-λ=2δ(11+n-n)]的奇异性,应变具有R-2δ的奇异性对于不同的材料常数和不同的缺口角度,给出了不可压缩橡胶类材料缺口顶端应力及应变分布曲线,揭示了缺口顶端应力应变场的特性

2)rubber like material橡胶类材料

1.Method of nonlinear element has been used to the research on large deformation ofrubber like material.研究了非线性有限元方法在橡胶类材料中的应用。

2.A method for insertingrubber like material into a general FEM code—DIANA is proposed.提出了在有限元通用程序DIANA中加入自定义的材料模型的方法 ,并通过编写程序模块实现自定义橡胶类材料模型与DIANA通用软件平台的接口 。

3)rubber-like materials橡胶类材料

1.Constitutive model ofrubber-like materials with significant hardening at large strains;橡胶类材料大应变时明显硬化的本构分析

2.The new constitutive function ofrubber-like materials with hardening phenomenon is established in this article,basing on the experiment of simple axial extensibility according to the national related norm GB528.针对橡胶类材料大应变时硬化现象,采用国家GB528标准,在室温下通过单轴拉伸本构实验,建立了基于主伸长的连续介质力学的新本构模型,并确定应变能密度函数中的本构参数,再利用简单剪切实验进行参数验证,表明新本构关系的可行性与有效性。

4)Rubber material橡胶材料

1.A review of elastic constitutive model for rubber materials;橡胶材料的超弹性本构模型

2.Finite element analysis of the rubber material"s shear and torsion;橡胶材料剪切与扭转变形的有限元分析

3.Finite element analysis of super-elastic rubber materials based on the Mooney-Rivlin and Yeoh model;基于Mooney-Rivlin和Yeoh模型的超弹性橡胶材料有限元分析

英文短句/例句

1.rubber materials for vibration isolators防振橡胶用橡胶材料

2." Rubber, vulcanized--Classification--Rubber materials"GB/T16589-1996硫化橡胶分类橡胶材料

3.rubber packing materials for industrial use工业用密封橡胶材料

4.STUDY ON THE ELASTOMER COMPATIBILITY OF RUBBER SEED OIL BIODIESEL橡胶籽生物柴油与橡胶材料的相容性研究

5.testing method for dynamic properties of rubber materials for vibration isolators防振橡胶材料的动态性能的测定

6.testing methods for fatigue properties of rubber materials for vibration isolators防振橡胶材料的疲劳性能试验方法

7.The Study of Modified Y_2O_3 Reinforced Rubber Material;改性Y_2O_3增强橡胶材料研究

8.Multiplex Damping Materials of Metal Rubber-Silicone Rubber金属橡胶/硅橡胶复合阻尼材料的研究

9.Study on Fatigue Behavior of MR/Silicone Rubber Composite Materials for Damping金属橡胶/硅橡胶复合阻尼材料疲劳性能研究

10.Preparation and Properties of Cis-polybutadiene Rubber/Acrylic Rubber/Poly (methyl vinyl siloxane) Blends顺丁橡胶/丙烯酸酯橡胶/甲基乙烯基硅橡胶共混材料制备及性能

11.Uses: Coat, piant, silica rubber, plastic, resin product packing, tooth used material, binder, detergent, printing ink, pigment, precise china, tire, rubber, fireproof material.产品用途:涂料、漆、胶、程塑料、橡胶、瓷、用材料、合剂、墨、料、火、磨材料等.

12.any of various synthetic materials that resemble rubber.任何一种类似天然橡胶的合成材料。

13.RubBer thread and cord, textile covered用纺织材料包覆的橡胶线及绳

14.an electric cable insulated with rubber用橡胶作绝缘材料的电缆

15.Rubber is an elastic material.橡胶是一种具有弹性的材料。

16.STUDY ON MECHANICAL PROPERTY OF EXFOLIATED SILICONE RUBBER/CLAY NANOCOMPOSITES剥离型硅橡胶/黏土纳米复合材料研究

17.The Study on Wood-Rubber Multifunctional Environmental Composite Panel;木质—橡胶功能性环保复合材料的研究

18.Study on Rubber-Based Piezoelectric Damping Composites;新型橡胶基压电阻尼复合材料的研究

相关短句/例句

rubber like material橡胶类材料

1.Method of nonlinear element has been used to the research on large deformation ofrubber like material.研究了非线性有限元方法在橡胶类材料中的应用。

2.A method for insertingrubber like material into a general FEM code—DIANA is proposed.提出了在有限元通用程序DIANA中加入自定义的材料模型的方法 ,并通过编写程序模块实现自定义橡胶类材料模型与DIANA通用软件平台的接口 。

3)rubber-like materials橡胶类材料

1.Constitutive model ofrubber-like materials with significant hardening at large strains;橡胶类材料大应变时明显硬化的本构分析

2.The new constitutive function ofrubber-like materials with hardening phenomenon is established in this article,basing on the experiment of simple axial extensibility according to the national related norm GB528.针对橡胶类材料大应变时硬化现象,采用国家GB528标准,在室温下通过单轴拉伸本构实验,建立了基于主伸长的连续介质力学的新本构模型,并确定应变能密度函数中的本构参数,再利用简单剪切实验进行参数验证,表明新本构关系的可行性与有效性。

4)Rubber material橡胶材料

1.A review of elastic constitutive model for rubber materials;橡胶材料的超弹性本构模型

2.Finite element analysis of the rubber material"s shear and torsion;橡胶材料剪切与扭转变形的有限元分析

3.Finite element analysis of super-elastic rubber materials based on the Mooney-Rivlin and Yeoh model;基于Mooney-Rivlin和Yeoh模型的超弹性橡胶材料有限元分析

5)rubber-like material橡胶材料

1.The constructive law ofrubber-like material is complicated and few experimental researches have been carried out on it.橡胶材料具有良好的弹性性能和拉伸能力,为典型的超弹性材料。

2.This paper investigates the plane strain crack-tip field in a homogeneous and isotropicrubber-like material under tension by means of the fully non-linear elastic theory.采用完全非线性弹性理论,研究了一类均匀的、各向同性的橡胶材料受拉情况下平面应变裂纹尖端场基于文献[1,7,8]给出的新的本构关系,导出了裂纹尖端场的渐近方程,并给出了解答揭示了裂纹尖端场的奇异特性数值结果表明,裂纹尖端应力具有r-m(m=1+12n+1·n-1n+1)的奇异

6)rubber[英]["r?b?(r)][美]["r?b?]橡胶材料

1.FEM Analysis for Rubber;橡胶材料制品的有限元分析

2.High-density jet fuel HDF-1 is a synthesized fuel, the compatibility of fuel HDF-1 withrubbers must be investigated for its further storage, transport and using.采用升温加速氧化的方法,考察了常用橡胶材料与燃料HDF 1的相容性,结果表明燃料HDF 1使丁腈胶4170和5171的物理性能变差,对G402胶影响很小;使用丁腈胶对燃料HDF 1化学安定性负面影响较大。

3.The applications of low-temperature plasma techniques in surface modification for textiles, metals, plastics,rubber and biomaterials are introduced.介绍了低温等离子体在材料表面改性方面的应用情况:用低温等离子体处理羊毛、棉、涤纶等纺织纤维材料,可提高纤维的吸附性、可染性、可纺性,并可结合各种功能整理剂赋予纤维以特殊的性能;金属材料表面经等离子体处理后,可提高耐磨性、抗腐蚀性、光滑度和装饰性;对塑料橡胶材料表面的等离子体处理可改善材料的粘结性、亲水性和电学性能;生物医用材料表面经等离子体处理可有效地改善血液相容性和组织相容性。

延伸阅读

橡胶模具、橡胶压模、橡胶硫化模分子式:CAS号:性质:又称橡胶模具、橡胶压模、橡胶硫化模。用于压制橡胶产品的金属模型。一般用钢材(如45号钢)按图纸要求经机械加工而制得,并经热处理以提高其硬度及耐磨性。模具型腔与产品结构相同,型腔尺寸必须考虑不同橡胶的收缩率,在产品尺寸基础上进行放大或缩小,方可得到合适的产品尺寸。模具从工艺操作考虑还要设置流胶槽、启模口、定位销等。

本内容不代表本网观点和政治立场,如有侵犯你的权益请联系我们处理。
网友评论
网友评论仅供其表达个人看法,并不表明网站立场。