聚对苯二甲酸乙二醇酯,polyethylene terephthalate
1)polyethylene terephthalate聚对苯二甲酸乙二醇酯
1.Research progress in synthesis ofpolyethylene terephthalate;聚对苯二甲酸乙二醇酯合成的研究进展
2.Study on blood compatibility ofpolyethylene terephthalate (PET) modified by plasma surface grafting;等离子体表面接枝改性聚对苯二甲酸乙二醇酯的血液相容性研究
3.The ultrasonic extraction technique of oligomers frompolyethylene terephthalate (PET) was studied by orthogonal test.采用正交实验法研究了超声波提取聚对苯二甲酸乙二醇酯(PET)中的齐聚物的工艺,考察了萃取的溶剂种类及其用量、萃取时间和次数对齐取物萃取的影响。
英文短句/例句
1.polyethylene glycol terephthalate聚对苯二甲酸乙二醇酯
2.Study on the PET/Inorganic Powder Polymer聚对苯二甲酸乙二醇酯/无机粉体聚合物的研究
3.Poly (Ethylene Terephthalate) Having Higher Rigidity and Improved Toughened with Well Processability;易成型刚性优良的增韧聚对苯二甲酸乙二醇酯
4.Study of Functionalized Poly (Ethylene Terephthalate) Blends under Radiation聚对苯二甲酸乙二醇酯的共混辐射改性研究
5.Molecular Structure of Chain-Extended Poly(Ethylene Terephthalate)聚对苯二甲酸乙二醇酯扩链产物的分子结构
6.Crystallization Behavior of PBT/PET Block Copolyesters聚对苯二甲酸丁二醇酯/聚对苯二甲酸乙二醇酯嵌段共聚物的结晶行为
7.Catalysed Depolymerization of Polycarbonate and Polyethylene Terephthalate in Supercritical and Sub-Critical Water超/亚临界水中聚碳酸酯/聚对苯二甲酸乙二醇酯催化解聚研究
8.Catalytic Property of Solid Acid Catalyst in Glycolysis of Polyethylene Terephthalate固体酸催化剂在醇解聚对苯二甲酸乙二醇酯反应中的催化性能
9.Calculations of Physical Properties and Phase Equilibrium in Polyethylene Glycol Terephthalate Esterification System聚对苯二甲酸乙二醇酯酯化过程组分物性及相平衡计算
10.Study on Nano-Composites of Poly (Ethylene Terephthalate) and Titanium Dioxide;聚对苯二甲酸乙二醇酯/二氧化钛纳米复合材料的研究
11.Morphology, Microstructure and Properties of Poly(Ethylene Terephthalate) /Polyamide-6 Blend;聚对苯二甲酸乙二醇酯/聚酰胺6共混体系的形态、结构与性能研究
12.Preparation of PET/MWNTs Nano Composite by Covalent Grafting;多壁碳纳米管与聚对苯二甲酸乙二醇酯的接枝聚合
13.Study on Poly(Ethylene Terephthalate)/inorganic Nano-particle In-situ Composites;聚对苯二甲酸乙二醇酯/无机纳米粒子原位复合材料的研究
14.Preparation, Structure and Properties of Poly (Ethylene Terephthalate)/Montmorillonite Nanocomposite;聚对苯二甲酸乙二醇酯/蒙脱土纳米复合材料的制备、结构及性能
15.Preparation and Characterization of Poly (Ethylene Terephthalate) Nanocomposites;聚对苯二甲酸乙二醇酯纳米复合材料的制备及表征
16.ethylene terephthalate对苯二甲酸乙二[醇]酯
17.oligoterephthalic acid glycol ester对苯二甲酸乙二醇酯低聚物
18.Catalytic Synthesis of Ethylene Glycol Diacetate with ρ-Toluene Sulpthonic Acid;对甲苯磺酸催化合成二乙酸乙二醇酯
相关短句/例句
Poly(ethylene terephthalate)聚对苯二甲酸乙二醇酯
1.Poly(ethylene terephthalate)(PET)and PA5935 were blended in a high speed mixer,and then injected into specimense.将聚对苯二甲酸乙二醇酯(PET)与PA5935高速共混,注射制样,样品的热性能、力学性能、阻燃性能和流变性能等测试结果表明,在PET中加入少量PA5935改善了PET抗熔滴性能与炭化性能,但结晶度、氧指数和部分力学性能下降。
2.The immiscible poly(ethylene terephthalate)(PET)/polypropylene(PP)blend was prepared by melt mixing and its structural rheology was studied.通过熔融共混制备了不相容的聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合体系,研究了复合体系的结构流变学。
3.The feasibility of in-situ microfibrillar method on recycling poly(ethylene terephthalate)(PET) and high-density polyethylene(HDPE) mixtures was carried out by four repetitive extrusion.研究了原位微纤化方法在回收聚对苯二甲酸乙二醇酯(PET)和高密度聚乙烯(HDPE)混合物方面的应用。
3)PET[英][pet][美][p?t]聚对苯二甲酸乙二醇酯
1.Interaction Parameters of thePET/PC andPET/Phenoxy Resin Blends;聚对苯二甲酸乙二醇酯与聚碳酸酯及聚酚氧树脂间的相互作用参数
2.Preparation ofPET/MWNTs Nano Composite by Covalent Grafting;多壁碳纳米管与聚对苯二甲酸乙二醇酯的接枝聚合
3.The grafting product was used as the reactive compatibilizer of HDPE/PET blend and the influences of the compatibilizer on mechanical properties, thermostimulative shape memory function of blends were discussed.结果表明:采用GMA/St双组分单体具有较高的接枝率,生成的接枝物对HDPE/聚对苯二甲酸乙二醇酯(PET)共混合金的增容效果较好;提高了体系的力学性能和热致形状记忆性能,且HDPE-g-(GMA-co-St)含量为5～10phr时,合金具有较好的综合性能。
4)Poly (ethylene terephthalate)聚对苯二甲酸乙二醇酯
1.The research on poly (ethylene terephthalate)/polycarbonate alloy was reviewed.评述了近年来聚对苯二甲酸乙二醇酯(PET)/ 聚碳酸酯(PC)合金研究的最新工作,着重讨论了 PET/PC 合金酯交换与相容性的关系、第三组分增容 PET/PC、PET/PC 体系的结晶行为以及 PET/PC 合金的应用4个方面,并对 PET/PC 共混物的发展方向进行了展望。
5)polyethyleneterephthalate聚乙二醇对苯二甲酸酯
6)Poly(ethylene glycol terephthalate) and poly(butylenes terephthalate)copolymer聚乙二醇对苯二甲酸酯/聚对苯二甲酸丁二醇酯
延伸阅读
聚对苯二甲酸乙二醇酯 聚对苯二甲酸乙二醇酯是由对苯二甲酸二甲酯与乙二醇酯交换或以对苯二甲酸与乙二醇酯化先合成对苯二甲酸双羟乙酯，然后再进行缩聚反应制得。属结晶型饱和聚酯，平均分子量(2-3)×104，重均与数均分子量之比为1.5-1．8。相对密度1.368．熔点225℃，流动温度243℃：，玻璃化温度80℃，马丁耐热80 ℃，热变形温度98℃(1. 82MPa)，分解温度353℃。具有优良的机械性能．刚性高．硬度大，吸水性很小，尺寸稳定性好。韧性好，耐冲击、耐摩擦、耐蠕变。耐化学性好，溶于甲酚、浓硫酸、硝基苯、三氯醋酸、氯苯酚，不溶于甲醇、乙醇、丙酮、烷烃。使用温度-100～120℃。弯曲强度 148-310MPa 吸水性 0. 06％-0.129％ 冲击强度 64.1-128J/m洛氏硬度 M 90-95伸长率 1.8％-2.7％
