奥氏体不锈钢304/316,304/316 austenitic stainless steel
1)304/316 austenitic stainless steel奥氏体不锈钢304/316
2)316 austenitic stainless steel316奥氏体不锈钢
1.The surface modification of316 austenitic stainless steel has been investigated by plasma-based low-energy ion implantatio n apparatus at various temperatures and working atmospheric pressure.采用等离子体基低能离子注入装置在不同注入温度、气压条件下氮离子注入316奥氏体不锈钢。
英文短句/例句
1.Numerical Simulation of Reheating and Hot Rolling Processes for 304 and 316 Austenitic Stainless Steel Plates Used for Nuclear Power Plants核电用304/316奥氏体不锈钢宽厚板加热和热轧过程的数值模拟
2.Krupp austenitic steel克虏伯奥氏体不锈钢
3.Boronizing of ZG1Cr18Ni9 austenite stainless steelZG1Cr18Ni9奥氏体不锈钢的渗硼
4.Welding of Austenite-Ferrite Diphasic Rustless Steel奥氏体-铁素体型双相不锈钢的焊接
5.Study on Active Screen Plasma Nitriding of Austenitic Stainless Steel;奥氏体不锈钢活性屏离子渗氮的研究
6.Study on Wear and Corrosion Properties of New Type Austenitic Stainless Steel;新型奥氏体不锈钢磨损、腐蚀性能研究
7.Strain Hardening of Cryogenic Vessels from Austenitic Stainless Steels;应变强化奥氏体不锈钢低温容器研究
8.Study on Stress Corrosion Cracking of Austenite Stainless Steel Bellows;奥氏体不锈钢波纹管的应力腐蚀研究
9.A Study on the Welding Technology of the Aoshi 18-8 Typed Stainless Steel;18-8型奥氏体不锈钢焊接工艺研究
10.Study on Fatigue Properties of a New Type Austenitic Stainless Steel 24Mn18Cr3Ni0.62N奥氏体不锈钢24Mn18Cr3Ni0.62N疲劳性能的研究
11.Welding and Properties of Cr15Mn9Ni1N Austenitic Stainless Steel Welded JointsCr15Mn9Ni1N奥氏体不锈钢的焊接及接头性能
12.Early Failure Analysis of 26Cr18Mn12Si2N Austenitic Heat-resistant Stainless Steel26Cr18Mn12Si2N奥氏体耐热不锈钢早期失效分析
13.Effect of Hydrogen on Mechanical Properties of 304L Austenitic Stainless Steel氢对304L奥氏体不锈钢力学性能的影响
14.Continuously Casting Practice of N08904 Super Austenitic Stainless SteelN08904超级奥氏体不锈钢的连铸实践
15.Constitutive characteristic of hot deformation for Cr15Mn9Cu2Ni1N austenitic stainless steelCr15Mn9Cu2Ni1N奥氏体不锈钢的热变形本构特性
16.Corrosion Behavior of Plasma Carburfzed Coating on Austenite Stainless Steel奥氏体不锈钢离子渗碳后的腐蚀行为
17.Analysis on fatigue fracture of high nitrogen austenitic stainless steel at room temperature高氮奥氏体不锈钢室温疲劳断口分析
18.Discussion on Cutting of Austenite Stainless Steel 1Cr18Ni9Ti奥氏体不锈钢1Cr18Ni9Ti的机械加工探讨
相关短句/例句
316 austenitic stainless steel316奥氏体不锈钢
1.The surface modification of316 austenitic stainless steel has been investigated by plasma-based low-energy ion implantatio n apparatus at various temperatures and working atmospheric pressure.采用等离子体基低能离子注入装置在不同注入温度、气压条件下氮离子注入316奥氏体不锈钢。
3)304 austenitic stainless steel304奥氏体不锈钢
1.The influences of deformation rate on the mechanical properties of304 austenitic stainless steel were studied by tensile test at room temperature.采用室温拉伸实验研究了不同变形速度对304奥氏体不锈钢力学性能的影响规律。
2.Solid Solution Nitriding of 304 Austenitic stainless steel and 3Cr13 Martensite stainless steel was investigated under the following technical parameters: temperature 900℃~1150℃,nitrogen pressure 0.本文对304奥氏体不锈钢和3Cr13马氏体不锈钢的固溶渗氮进行了研究,固溶渗氮工艺参数的变化范围为:渗氮温度900℃～1150℃,氮气压力0。
3.In this paper investigated the deep-drawing process of304 austenitic stainless steel sheet and the friction and lubrication in the deforming process of the shell of permissible respirator self rescue from carbon monoxide.本文研究了304奥氏体不锈钢自救器筒体制造工艺中的拉深工艺及摩擦润滑情况。
4)304 Austenite Stainless Steel304奥氏体不锈钢
1.Effect of Cu on Strain-Induced Martensite Transformation in304 Austenite Stainless Steel;Cu对304奥氏体不锈钢应变诱发马氏体相变的影响
2.Starting from lubricating status and drawing speed, the reasons of sticky lump caused by 304 austenite stainless steel drawing are analyzed, combining with actual situation of cooperating partner of the project, improving steps are provided, and proper lubricant is carried out.从润滑状态及拉伸速度入手,分析了304奥氏体不锈钢拉伸时粘结瘤形成原因,结合项目合作单位的实际情况提出了改进措施,配制了合适的润滑剂。
3.In the present paper, the effects of processing conditions on the deep-drawing deformation of 304 austenite stainless steel sheet were investigated by means of physic simulation and numerical simulation.本文采用物理模拟和数值模拟技术，研究了拉深工艺条件对304奥氏体不锈钢拉深成形过程的影响规律。
5)as-cast 304 austenitic stainless steel铸态304奥氏体不锈钢
6)AISI 304 austenitic stainless steelAISI 304奥氏体不锈钢
1.Glow discharge nitriding and nitrocarburising inAISI 304 austenitic stainless steel were approached in this paper.本课题针对AISI 304奥氏体不锈钢进行辉光离子渗氮和离子氮碳共渗研究。
延伸阅读
奥氏体不锈钢分子式：CAS号：性质：在常温下具有奥氏体组织的不锈钢。含铬18%和镍8%的不锈钢是最典型的奥氏体不锈钢，它常被称为18-8不锈钢。这种不锈钢在很宽的温度范围内都具有很高的强韧性，富于延展性，容易轧制和压缩等冷加工，它的耐蚀性和耐酸性，都优于铁素体不锈钢和马氏体不锈钢。添加钼和铜的镍铬系奥氏体不锈钢具有更好的耐蚀性和耐酸性，而且耐盐酸和卤化物腐蚀性也大为改善。除铬镍系奥氏体不锈钢之外，还有铬镍锰系以及不含镍和铬的铁锰铝系奥氏体不锈钢。由于奥氏体不锈钢具有全面、良好的综合性能，在工业上获得了广泛应用。
