翅片管蒸发器,finned-tube evaporator
1)finned-tube evaporator翅片管蒸发器
1.A distributed parameter model was proposed to simulate the airside heat transfer of thefinned-tube evaporators in the frosting process.建立了结霜条件下翅片管蒸发器空气侧流动和换热的分布参数仿真模型,模型考虑了蒸发器结构、霜层厚度以及湿空气状态等参数在气流方向的沿程变化。
2.The dynamic performance of afinned-tube evaporator of a small-scale refrigeration installation with a indirect cooling in the frosting process was experimentally studied under low temperature conditions(-18℃).在低温工况下(-18℃),对一小型间冷式制冷装置的变间距翅片管蒸发器在结霜工况下的动态性能进行了实验研究,考察了进口空气温度、空气相对湿度和空气风速对蒸发器性能的影响,给出了换热量、空气侧压降、结霜量和总传热系数在结霜过程中的动态变化规律。
3.Frost offinned-tube evaporator will increase air pressure drop and heat transfer resistance.翅片管蒸发器的结霜将增加空气压降,增大传热热阻,从而直接影响到蒸发器的效率及空气侧平均换热系数。
英文短句/例句
mon Program for Structure Design of Fin-and-Tube Evaporator and Condenser翅片管蒸发器、冷凝器结构设计的通用程序开发
2.A Hybrid ARIMA-SVM Model on Predicting Finned Tube Evaporator Performance under Frosting Conditions基于ARIMA-SVM模型的翅片管蒸发器结霜性能预测
3.Effect of relative humidity on the performance of finned-tube evaporator in air-conditioning相对湿度对空调中翅片管蒸发器性能的影响
4.QUANTITATIVE EXPERIMENT ANALYSIS ON TESTING FROST THICKNESS OF FINNED-TUBE EVAPORATOR BY IMAGE PROCESSING翅片管蒸发器结霜厚度图象处理定量化实验分析
5.Effect of airflow distribution shape on the performance of finned-tube evaporator in air-conditioning风速分布形状对空调中翅片管蒸发器性能的影响
6.Simulation and Experimental Study on Finned-Tube Evaporators in the Frosting Process;翅片管式蒸发器结霜性能的仿真与实验研究
7.CAD of Plate-Finned-Tube Evaporator & Virtual Refrigeration Education System;翅片管式蒸发器CAD与虚拟制冷教学系统
8.Effects of intermittent operation on long-term performance of finned coil type evaporator间歇运行对翅片管式蒸发器长效特性的影响
9.STUDY ON HEAT TRANSFER ENHANCEMENT OF FREON-12 DRY EVAPORATOR USING INTEGRAL INTERNAL SPIRAL FIN TUBE整体型内螺旋翅片管氟利昂12干式蒸发器传热强化试验研究
10.Impact of Interim Running on Heat Flow Rate and Pressure Drop of Finned-Tube Heat Exchangers间歇运行对翅片管式蒸发器长效换热和压降特性的影响
11.The study on heat and mass transfer of the fin-and-tube condenser with spray evaporating喷淋蒸发翅管式冷凝器传热传质研究
12.Research Status and Development of Refrigerant Circuitry in Fin-and-tube Heat Exchangers翅片管换热器流程布置研究现状与发展
13.Study and Development on CAD and Optimization Design System of Finned-Pipe Heat Exchanger;翅片管换热器CAD及优化设计系统的研究与开发
14.Secondary Development Technology for Fin-and-tube Heat Exchanger Based on Solidworks and VC6.0基于Solidworks和VC6.0的翅片管换热器的二次开发
15.double pipe longitudinal finned exchanger双套管式纵向翅片换热器
16.The Surface Frosting Mechanism Research of Fin-tube Heat Exchanger under Low-temperature;低温翅片管换热器表面结霜机理研究
17.Heat Transfer Study on U-tube of ACC空冷凝汽器U型翅片管换热特性研究
18.Analysis on the Development & Application of Heat Exchanger with Cooper Fin Part Ⅰ: Comparison of Copper Fin and Aluminum Fin Heat Exchangers铜翅片换热器开发应用的分析Ⅰ——铜、铝翅片换热器性能对比
相关短句/例句
fin-tube evaporator翅片管式蒸发器
1.The simulation and analysis offin-tube evaporator for air-conditioning;空调用翅片管式蒸发器的模拟与分析
3)Finned-tube evaporator翅片管式蒸发器
1.The conclusions are of great significance on the design of finned-tube evaporator in industry.计算结果和实验测试的结果吻合较好 ,研究结论对翅片管式蒸发器设计具有重要意
4)finnedtube evaporators翅片-管式蒸发器
5)vertical steam generator with finned pipes翅片管立式蒸汽发生器
6)Rotary finned tube evaporator旋转式翅片管蒸发器
延伸阅读
垂直长管式蒸发器分子式：CAS号：性质：主要由简单的单程管壳式换热器组成。加热管直径常见的为25～50mm，也有小于25mm的。管长为6～10m。这种蒸发器大多是单程型的，即溶液在蒸发器中只通过一次，不作循环流动，在造纸工业中最常见。此外还有循环型，即溶液在蒸发器中循环流动。溶液通过加热室时，在管壁呈膜状流动，故又称为膜式蒸发器。又可分为升膜式和降膜式两大类。
