传动滚筒,driving drum
1)driving drum传动滚筒
1.Finite element analysis ofdriving drum of belt conveyor and its optimized design;带式输送机传动滚筒的有限元分析及其优化设计
2.Finite element analysis ondriving drum of mine belt conveyor;矿用带式输送机传动滚筒的有限元分析
3.Optimized design ofdriving drum for mine belt conveyor;矿用带式输送机传动滚筒的优化设计
英文短句/例句
1.The Research on the Driving Drum for Belt Conveyor Based on Virtual Prototype Technology;基于虚拟样机技术的带式输送机传动滚筒研究
2.The Design and Research on Virtual Driving Drum Prototype of Belt Conveyor带式输送机传动滚筒虚拟样机的设计与研究
3.Mechanics in Design of Transmission Roller of Belt Conveyor带式输送机传动滚筒轴设计中的力学问题
4.Driving Drum Research for Belt Conveyor Based on Pro/Mechanica基于Pro/Mechanica的矿用带式输送机传动滚筒研究
5.Analysis of Causes of Roll-cut Inefficiency on Driving-drum Spinle Key-slot of DSP160/1000 Type Belt ConveyerDSP160/1000带式输送机传动滚筒轴键槽滚切失效成因分析
6.Finite element analysis and optimal design of heavy drive pulley of belt conveyor带式输送机大扭矩传动滚筒的有限元分析及优化设计
7.C ompare to conventional live roller types, it is extremely safe. Should there be any object get in between rollers, the slip mechanism will stop the roller from rotate.与其他传动结构相比较更安全，若有工件卡在滚筒之间，皮带会自行打滑，滚筒停止转动。
8.motor for kicker and doffer抖动器和滚筒用电动机
9.Some necessary analyses aro also given to the rigid transmission with two drums对双滚筒刚性传动的应用问题,也作了必要的分析。
10.To toss or whirl in a drum, tumbler, or tumbling box.翻腾打滚在筒中、干燥机中或研磨滚筒中摇动或转动
11.Study on Kinematics and Dynamics of Roller for Collecting Plastic Film Residue;残膜捡拾滚筒的运动学和动力学研究
12.brayer:a small hand roller used to spread ink thinly and evenly.涂墨滚:手动小滚筒,用于薄而匀地涂墨水
13.A small hand roller used to spread ink thinly and evenly.涂墨滚手动小滚筒，用于薄而匀地涂墨水
14.The length of line is prolonged without increasing of driving. Its driving spindle is to drive single roller to form accumulation.在不增加驱动的前提下能有效的延长线体的长度，其传动轴为驱动单根滚筒，从而形成堆积。
15.Roller opposite forces type automobile brake testerGB/T13564-1992滚筒反力式汽车制动检验台
16.This large gear turns the small one to rotate the cylinder.这个大齿轮带动小齿轮使滚筒旋转。
17.The Calculation of Gravature Printing Pressure and Cylinder Driving Power;凹版印刷机压力及滚筒驱动功率计算
18.The Modeling and Analysis on Dynamic Function of Blanket Cylinder of the PZ1650 Printing Machine;PZ1650橡皮滚筒动态性能的建模与分析
相关短句/例句
driving pulley传动滚筒
1.Finite element analysis of heavydriving pulley in belt conveyor;带式输送机重型传动滚筒的有限元分析
2.For deficiencies in the design ofdriving pulley of the belt- convey, carried on analysis and design.针对带式输送机大型传动滚筒在设计中的不足,对其进行了力学分析和设计。
3)transmission drum传动滚筒
1.The improvement of SD—80 type belt conveyormaintransmission drum;SD—80型带式输送机主传动滚筒的改进
4)drum drive滚筒传动
1.This paper briefly expounds the main points of design fordrum drive system of well logging wheeled machice.简要论述了该石油测井车电缆滚筒传动系统的设计要点。
5)driving roller shaft传动滚筒轴
1.Stress analysis ofdriving roller shaft of belt conveyor with the finite element;带式输送机传动滚筒轴的有限元分析
6)rotor transmission滚筒传动系
延伸阅读
传动：摆线针轮传动由外齿轮齿廓为变态摆线﹑内齿轮轮齿为圆销的一对内嚙合齿轮和输出机构所组成的行星齿轮传动。除齿轮的齿廓外﹐其他结构与少齿差行星齿轮传动相同。摆线针轮行星减速器的传动比约为6～87﹐效率一般为0.9～0.94。图轮齿曲线的形成 为轮齿曲线的形成原理。发生圆在基圆上滚动﹐若大於r1﹐M"点画出的是长幅外摆线﹔若小於r1﹐M""点画出的是短幅外摆线﹔用这些摆线中一根曲线上的任意点作为圆心﹐以针齿半径rz为半径画一系列圆﹐而后作一根与这一系列圆相切的曲线﹐得到的就是相应的长幅外摆线齿廓或短幅外摆线齿廓﹐其中短幅外摆线齿廓应用最广。用整条短幅外摆线作齿廓时﹐针轮和摆线轮的齿数差仅为1﹐而且理论上针轮有一半的齿数都与摆线轮齿同时嚙合传动。但如果用部分曲线为齿廓就可得到两齿差和三齿差的摆线针轮传动。用长幅外摆线的一部分作轮齿曲线时﹐其齿廓与圆近似﹐并与针齿半径相差不大﹐因此可用它的密切圆弧代替。摆线针轮传动的优点是传动比大﹑结构紧凑﹑效率高﹑运转平稳和寿命长。
