压电纤维复合材料,piezoelectric fiber composite material
1)piezoelectric fiber composite material压电纤维复合材料
1.Application and principle of piezoelectric materials in lift augmentation and drag reduction of airfoil in flight were discussed,and the preparation technology,performance and the research progress of high-displacement pizoelectric actuators andpiezoelectric fiber composite materials were reviewed.阐述了压电材料在飞行机翼增升减阻方面应用的原理,分别综述了大位移压电驱动器和压电纤维复合材料的制备工艺、性能和研究进展,并指出其今后的主要研究方向为增大压电驱动器位移以产生复杂变形面,同时通过计算机模拟的方法来优化压电纤维复合材料的设计与制备。
英文短句/例句
1.Dynamic modeling of composite rotor blade with piezoelectric fiber压电纤维复合材料桨叶的动力学建模
2.Continuous Spinning of Piezoelectric PZT Ceramic Fibers and Their Application on 1-3 Type Fiber/Polymer CompositesPZT压电陶瓷纤维连续纺丝及其在1-3型压电纤维复合材料的应用
3.Research on Interdigitated Electrodes Piezoelectric Fiber Composites" Performance Based on ANSYS;基于ANSYS的交叉指形电极压电纤维复合材料仿真研究
4.STUDY OF THE CFRP CYLINDER UNDER EXTERNAL HYDROSTATIC PRESSURE碳纤维复合材料圆筒受外压结构分析
5.Trail Production of Large Thickness Composites Laminate of Carbon Fiber大厚度碳纤维复合材料层压板的试制
6.carbon fibre plastic composite碳纤维塑料复合材料
7.Dielectric and piezoelectric properties of acrylonitrile butadiene rubber/lead magnesio-niobate piezoelectric ceram/carbon fiber composites丁腈橡胶/铌镁锆钛酸铅/碳纤维复合材料的介电性能和压电性能
8.Study on the Electrically Conductive Performance of Carbon Fiber/Polymer Composites;碳纤维/树脂基复合材料导电性能研究
9.Study on the Effect of PZT Based Piezoelectric Fibers on the Properties of 1-3 Composites;PZT基压电纤维/环氧树脂1-3复合材料结构及性能研究
10.The Study of Experiment of Hydroelectric-stationsteel-Penstocks Reinforce by CFRP;碳纤维复合材料加固水电站压力钢管模型试验研究
11.Electrical characteristic and piezoresistivity of carbon fiber graphite cement-based composites containing CCCW掺CCCW的碳纤维石墨水泥基复合材料的导电及压阻特性
12.THEORY ANALYSIS AND EXPERIMENT STUDY ON THE PROPERTY OF 1-3 MODE PIEZOCERAMICS FIBER COMPOSITE1-3型压电陶瓷纤维复合材料性能的理论分析与实验研究
13.carbon fiber reinforced composite碳纤维增强复合材料
14.asbestos-ceramic fiber composite石棉—陶瓷纤维复合材料
15.graphite fiber reinforced composite石墨纤维增强复合材料
16.oriented fiber reinforced composite定向纤维增强复合材料
17.chopped fiber reinforced composite短切纤维增强复合材料
18.boron fiber reinforced composite硼纤维增强复合材料
相关短句/例句
electrode piezoelectric fiber composites电极压电纤维复合材料(PFCs)
3)interdigital electrode piezoelectric fiber composites叉型电极压电纤维复合材料(IDEPFC)
4)interdigitated electrodes piezoelectric fiber composites(IDEPFCs)交叉指形电极压电纤维复合材料
5)1-3 piezoelectric fiber composites(1-3 PFC)1-3型压电纤维复合材料
1.Deformations of four typies of laminates with 1-3 piezoelectric fiber composites(1-3 PFC) layers are obtained by using the analytical methods.对4类典型铺层的1-3型压电纤维复合材料主动板的变形模式进行了理论分析。
6)orthotropic piezoelectric fiber composites (OPFC)正交异性压电纤维复合材料
延伸阅读
压电功能复合材料分子式：CAS号：性质：以橡胶、环氧树脂、压电高分子材料(如PVDF)为基体材料，锆钛酸铅(PZT)、钛酸铅、偏铌酸铅等压电陶瓷粉末为功能体复合而成，具有压电性质的复合材料。与单质压电材料相比较，压电复合材料具有许多优良性能，它具有更高的水声换能优值q(q=dhgh)，能制作更灵敏的主动声纳和水听器，PZT的q值约为200×10-15m2/N，最好的单质材料PbNb2O6的q值也仅为2000×10-15m2/N，而PZT和高分子材料通过适当方式复合制成的压电复合材料q值可达200 000×10-15m2/N，为PZT的1000倍。由于相对密度较小与水声阻抗匹配得更好，而减小声波在界面上的反射。复合材料具韧性，更能承受由压力涨落而引起的机械力冲击，并易做成所需的形状。
