100字范文,内容丰富有趣,生活中的好帮手!
100字范文 > 去合金化 dealloying英语短句 例句大全

去合金化 dealloying英语短句 例句大全

时间:2024-05-05 08:48:29

相关推荐

去合金化 dealloying英语短句 例句大全

去合金化,dealloying

1)dealloying[,di:?"l?ii?]去合金化

1.Study on Dealloying of Au-Ni Alloys;Au-Ni合金的去合金化研究

2.Preparation of nanoporous copper bydealloying Mn-Cu alloy去合金化制备纳米多孔铜

3.Nanoporous gold film with pore size of ~15 nm was fabricated directly on the surface of gold by an alloying/dealloying process, involving the electrodeposition of Zn on gold surface, thermal treatment to form alloy layer, and chemicaldealloying of Zn in the alloy.采用合金化/去合金化法在金电极表面制备出一层具有纳米孔结构的金膜,其孔径约为15nm。

英文短句/例句

1.Electrooxidation of Formic Acid on Pd-Ni Alloy Film Electrode-The Effect of Dealloying钯镍合金薄膜电极上甲酸电氧化-去合金化效应

2.Blood compatibility of the low-temperature dealloying nickel-titanium shape memory alloy低温去合金化镍钛形状记忆合金的血液相容性

3.Progress in Research on Preparations of Nanoporours Metals by Dealloying去合金化制备纳米多孔金属材料的研究进展

4.Study on Fabrication and Mechanical Properties of Porous Silver by Dealloying去合金化法制备多孔银及其力学性能研究

5.Study on Removal of P-nitrophenol from Solution by Layer Double Oxide;复合金属氧化物去除水中对硝基苯酚的研究

6.The Investigation of the New Method for Heavy Metal Arsenic’s Removal in the Poly Aluminium Chloride去除聚合氯化铝中金属砷的新方法研究

7.Study on Heavy Metal Lead Removal from Aluminium polychlorid by Microelectrolysis微电解法去除聚合氯化铝中金属铅的研究

8.To lose calcium or calcium compounds.脱去钙,脱去钙化合物

9.The time and money we waste trying to meet cultural standards are a shame.花费时间和金钱去迎合文化的审美标准,这本就是一种耻辱。

10.nitrided niobium-titanium-tungsten alloy氧化铌--钛--钨合金

11.dispersion strengthened alloys made by powder metallurgy粉末冶金弥散强化合金

12.Research on Removing Non-Metallic Inclusions from AZ91 Magnesium Alloy;AZ91镁合金中非金属夹杂物的去除研究

13.Preparation of Fe_3Al Intermetallic Compound by Mechanical Alloying MethodFe_3Al金属间化合物的机械合金化制备

14.Cyclic Oxidation Behavior of Ni-20Cr Alloy Prepared by Mechanical Alloying机械合金化Ni-20Cr合金的循环氧化行为

15.thermochemistry of organometallic compounds有机金属化合物热化学

16.chemistry of organometallic compound有机金属化合物化学

17.photochemistry of inorganic metallic compounds无机金属化合物光化学

18.Suitable for a wide range of low and high alloy steels, titanium alloys, austenitic stainless steels, heat resistant alloys, fibre glass reinforced plastics etc.适合于低合金钢、合金钢、合金、氏体不锈钢、热合金、璃纤维强化塑料等。

相关短句/例句

dealloy去合金化

1.Porous silver materials have been fabricated bydealloying of Ag-Zn alloys in H2SO4 solution.本文利用Ag-Zn合金在H2SO4溶液中去合金化法制备多孔银,采用X射线衍射分析、扫描电镜、EDS能谱分析等手段,研究了Ag23。

3)dealloying[,di:?"l?ii?]去合金

1.Fabrication of sponge-like nanoporous platinum electrocatalysts for oxygen reduction through alloying anddealloying processes;通过合金和去合金过程制备一种海绵状的纳米多孔铂以及对氧的电催化还原(英文)

4)dehybridization去混合化

1.The completedehybridization of this class of system was firstly realized according to the order-reducing character and by designing the controlling laws of sliding mode control.为了解决混合系统在任意切换规则下的稳定性问题 ,针对一类仿射非线性混合系统 ,首先利用滑模控制降阶的特性 ,设计滑模控制律对该类系统实现完全的去混合化 ,然后采用一般的非线性连续系统的控制理论方法进行控制设计 ,最后通过变换得到最终的滑模控制律 ,它能有效地保证混合系统的稳定性 。

5)alloying[英][?"l?i][美][?"l??]合金化

1.Study of Sn-Zn Lead-free Solder by Alloying;Sn-Zn无铅钎料合金化改性研究

2.Influence of Ce, Ca and Sr Alloying Addition on As-cast Microstructure of AZ91 Magnesium Alloy;Ce、Ca、Sr合金化对AZ91合金铸态组织的影响

3.Influence of Cycle Heat Treatment and Alloying on ADI"s Property;循环热处理和合金化对ADI性能的影响

6)microalloying微合金化

1.Application of V-microalloying Technology in Producing HRBL600 Reinforced Bar;钒铁微合金化工艺在HRBL600钢筋生产中的应用实践

2.The effect of V,N,Nbmicroalloying on the microstructure and properties of containing strip rolled from thin slab;V、N、Nb微合金化对薄板坯连轧带钢组织和性能的影响

3.Development History of Nb-microalloying Technology and Progress of Nb-microalloyed Steels;Nb微合金化和含铌钢的发展及技术进步

延伸阅读

表面合金化表面合金化surfacealloying通过扩散改变基体金属表面层的成分和组织的材料保护技术。机械制造中常用的是铝、铬、硅、钒和锌等的表面合金化层或渗层(利用金属卤化物蒸气与金属表面层产生化学反应或在液相中发生化学反应而形成)。①铝渗层,可用作碳素钢或低合金钢等制成的空气加热器、加热炉和蒸气过热器构件的覆层,层厚约125~1000微米,含铝约25%。②铬渗层,可用粉末法或熔盐法在低碳钢、高碳钢、合金钢、不锈钢、工具钢、铸铁和铁粉烧结件上生成,其抗蚀性相当于含铬30%的钢。碳铬层的硬度很高,耐磨性好,多用于保护阀门、喷嘴、泵、量规和工模具。③硅渗层,具有耐磨、耐蚀性能,硬度高,还具有良好的抗擦伤性,主要用于低碳(含碳小于0.25%)、低硫(含硫小于0.04%)钢等制成的泵轴、缸衬、阀门、传送带链的联结件和洗瓶机的构件等。④钒渗层,基体钢材中的碳含量至少应为0.4%,该渗层的硬度很高,但冷焊性不佳。⑤锌渗层,主要用在铁基体材料上,该渗层的特点是厚度均匀,抗腐蚀性能好。

本内容不代表本网观点和政治立场,如有侵犯你的权益请联系我们处理。
网友评论
网友评论仅供其表达个人看法,并不表明网站立场。