原位复合材料,in situ composite
1)in situ composite原位复合材料
1.Study on the orthorhombic experiment of the AlN/ZL101 In Situ composite;AlN/ZL101原位复合材料的正交实验研究
2.In order to gain higher magnetic performance and solve air pollution problems in extraction process of Fe-Cr fibers,cupreous body of Cu-13Fe-2Crin situ composite materials were corrupted by using chemical extraction.为解决Fe-Cr纤维提取过程中容易造成空气污染的问题,使得到的纤维具有较高的磁学性能,采用化学萃取法腐蚀掉Cu-13Fe-2Cr原位复合材料中的铜基体,制备了Fe-Cr金属纤维;通过调整硝酸与双氧水比例抑制NO2的产生;通过改变清洗方式使纤维具有较高的磁性。
3.Fe-Cr fibers were extracted from Cu-16Fe-2Crin situ composite wires in 65% nitric acid.Fe-Cr纤维由Cu-16Fe-2Cr原位复合材料硝酸法萃取得到。
英文短句/例句
1.The Study of (TiB_2+Al_3Ti)/ZL101 in Situ Composite;（TiB_2+Al_3Ti）/ZL101原位复合材料的研究
2.Study of Deformation-Processed Cu-10%Cr-3%Ag in Situ Composites;形变Cu-10%Cr-3%Ag原位复合材料研究
3.Study on Polypropylene/Nylon66 or Poly (butyleneterephthalate) In-situ Composites;HDPE/PA66或PBT原位复合材料的研究
4.The Study on Deformation-Processes Cu-Fe in Situ Composite;形变Cu-Fe原位复合材料的研究
5.Study on the orthorhombic experiment of the AlN/ZL101 In Situ composite;AlN/ZL101原位复合材料的正交实验研究
6.In Situ Synthesis of Al_3Ti Particulate-Reinforced Aluminum Matrix Composites;原位合成Al_3Ti增强Al基复合材料的研究
7.In Situ Assembly of Rare Earth/Polymer Luminescent Composite Material;原位组装稀土/聚合物复合发光材料
8.Study of In-situ Synthesis of SiC_p-WSi_2/MoSi_2 Composites;原位合成SiC_p-WSi_2/MoSi_2复合材料的研究
9.Polyazomethine/nylon-6 Composite by In-situ Polymerization;聚甲亚胺/尼龙-6原位聚合复合材料
10.Study on Synthesis and Properties of Ti_3AlC_2/Al_2O_3 Composites by In-situ Reaction;原位合成Ti_3AlC_2/Al_2O_3复合材料及其性能研究
11.The Research on Preparation of Al Matrix Composites by in Situ Reaction原位合成Al基复合材料制备工艺研究
12.Synthesis of Nano-CaCO_3/PVAc Composites by In-Situ Polymerization原位聚合法制备纳米CaCO_3/PVAc复合材料
13.Synthesis of Machinable Ternary TiC/Ti_3AlC_2 Composites by In-Situ ReactionsTiC/Ti_3AlC_2复合材料的原位合成
14.Cu-Doped Al_2O_3/TiAl Composites Synthesized by In-Situ Hot-Pressing Processes原位热压合成Cu掺杂Al_2O_3/TiAl复合材料
15.In-suit synthesis of NiAl(FeAl)/Al_2O_3+TiB_2 composites原位合成NiAl(FeAl)/TiB_2+Al_2O_3复合材料
16.Study on TiB_(2p)/Al-10Sn composites by in-situ synthesis process原位合成TiB_(2p)/Al-10Sn复合材料的研究
17.In-situ Mullite Rodlike Crystal Reinforced BAS Composite;原位生长莫来石棒晶增强BAS复合材料
18.A Study on Mg_2Si/Mg In-Situ Composites;原位自生Mg_2Si/Mg复合材料的研究
相关短句/例句
in-situ composite原位复合材料
1.Study on magnetic properties of Cu-Fe-Crin-situ composite and Fe-Cr fibers;Cu-Fe-Cr原位复合材料和Fe-Cr纤维的磁学特性研究
2.Structure and properties of Cu-Fe-Cr-Niin-situ composites;Cu-Fe-Cr-Ni原位复合材料的结构与性能
3.Melting Behaviors of MC Nylon 6/Nano-meter TiO_2 In-situ Composite;MCPA6/纳米TiO_2原位复合材料的熔融行为
3)in-situ composites原位复合材料
1.Microstructure and properties of Cu-Fe-Agin-situ composites;Cu-Fe-Ag原位复合材料的组织和性能
2.Effects of micro-alloying on microstructure and mechanical properties of Cu-15Crin-situ composites微合金化对Cu-15Cr原位复合材料组织和性能的影响
3.Non-isothermal crystallizations of the polycaprolactam chain segment grafted carbon fibre(CF)/monomer casting(MC) nylon 6in-situ composites were investigated at different cooling rates by means of differential scanning calorimetry(DSC).采用差示扫描量热(DSC)法,研究表面接枝聚己内酰胺链段的碳纤维(CF)/单体浇铸(MC)尼龙6原位复合材料,以及其在不同冷却速率下的结晶动力学特性;用Jeziorny法和Liu法对它们的非等温结晶动力学进行处理。
4)in situ composites原位复合材料
1.Preparation and properties of polylactide/nano-silicain situ composites;聚乳酸/纳米二氧化硅原位复合材料的制备和性能
2.The results show that In Cu-11Fe-4Crin situ composites,E(Cu) 5)Insitu Composite原位复合材料 1.The compatibility of the insitu composite of Polycarbonate(PC) and liquid crystalline copolyester can be improved by adding the multiblock copolymer prepared from PC and LC copolyesteramide oligomer.通过加入液晶聚酯酰胺和聚碳酸酯的多嵌段共聚物，可以有效地降低基体聚碳酸酯的玻璃化转变温度，提高热致液晶高分子ＰＥＴ/６０ＰＨＢ与聚碳酸酯原位复合材料的相容性。 6)in situ aluminium composite原位铝复合材料 延伸阅读 刚粒复合材料分子式：CAS号：性质：用粒度较均匀的刚性颗粒增强的复合材料。加入刚性填料主要为了提高基体材料的物理性能,如抗张强度、韧性、硬度或冲击强度等。有时加入一些价廉的填料主要为了降低成本。用于增强橡胶的刚性颗粒有炭黑和二氧化硅；用于增强塑料的有碳酸钙和滑石粉。填料能否起增强作用主要决定于它们与基体间的界面相互作用。以炭黑填充橡胶时,这种界面相互作用特别重要。在有些体系中可以通过以适当的偶联剂对填料表面进行处理以改善其与基体间的界面黏结力。
